Machine Learning Informed Visco-Plastic Model for the Cyclic Relaxation of 316H Stainless Steel at 550 C
Rou Du,Hengxu Song,Fuhai Gao,Yafei Mo,Ziming Yan,Zhuo Zhuang,Xiaoming Liu,Yueguang Wei
DOI: https://doi.org/10.1016/j.ijplas.2023.103743
IF: 8.5
2023-01-01
International Journal of Plasticity
Abstract:Among the structural alloys for this fast reactor, 316H stainless steel has emerged as a promising candidate. Because the operating temperature of Sodium-cooled reactor is specifically designed to be 550 degrees C, this operating temperature triggers material inelastic behavior depends more on the coupling of fatigue and creep, which complicates the constitutive model. By introducing static recovery terms, previous studies could capture some experimental features, but failed to describe the interaction by fatigue and creep. In this work, in order to describe the fatigue and creep during cyclic relaxation of 316H stainless steel at 550 degrees C, we propose a modified visco-plastic constitutive model within the framework of unified Chaboche model. In the proposed model, the parameters related to the static recovery items are coupled, and thus cannot be identified from experiments using the traditional trial and error. To address this issue, we employed the Bayesian approach to identify these parameters. The parameter identification involves two steps: (i) con-structing a Gaussian Process surrogate model using data generated from the finite element method, and (ii) obtaining the value of parameters through Markov Chain Monte Carlo sampling under the Bayesian framework. The proposed procedure, is demonstrated by the using experi-mental results of 316H stainless steel at 550 degrees C. Under the coupling of fatigue-creep, the material exhibits a cyclic-dependent accelerated stress relaxation before reaching the saturated stage and a steady state of relaxed stress after a long holding time. These mechanical responses are well predicted by the proposed model. Further, we conducted two kinds of multi-axial cyclic test, tensile test of notched bar and coupled tensile-torsion test, to validate the proposed constitutive model for the cyclic behavior under the multi-axial stress state.