Abstract:2.25Cr-1Mo-0.25V steel is the main material of hydrogenation reactor due to its good high temperature properties and hydrogen embrittlement resistance. As we all know, there is a great performance gap between virgin material and actual product. Nevertheless, current design methods cannot evaluate the impact of manufacturing. In engineering practice, tensile testing is widely implemented on online surveillance samples or experimentally simulated samples to acquire the actual material characteristics. However, sampling from service hydrogenation reactor, as well as simulating actual manufacturing process, is time-consuming, labor-intensive, and difficult. To systematically analyze the effect of fabrication on 2. 25Cr-1Mo-0. 25V steel, a prediction method that can consider manufacturing residual effects needs to be proposed. Nowadays, many data-driven methods, such as back propagation neural network (BPNN), support vector machine (SVM) and random forest (RF), are employed in predicting material behavior during hot forming, whereas they are scarcely applied on 2.25Cr-1Mo-0.25V steel. In this work, the mentioned three machine learning procedures were constructed to simulate the behavior of actually manufactured 2. 25Cr-1Mo-0.25V steel in uniaxial tensile test. Firstly, tensile samples were extracted from different locations of an actually manufactured hydrogenation reactor, and stretched at 454 degrees C and 482 degrees C. Subsequently, BPNN, SVM and RF models were developed on the obtained tensile curves, respectively. Their inputs were manufacturing parameter, sampling location, service temperature and tensile strain, whereas their output was tensile stress. Finally, the predictability of models was evaluated by test set data which were not involved in model training process. The results show that the predictions of BPNN, SVM and RF all agree well with experimental data. BPNN exhibits lowest prediction error and highest generalization power, SVM is somewhere in between, while RF is the worst. This work will contribute to the application of data-driven methods in material property prediction of 2. 25Cr-1Mo-0.25V steel.

Performance prediction of 304 L stainless steel based on machine learning

Physical metallurgy guided machine learning to predict hot deformation mechanism of stainless steel

A Method for Prediction of Forming Strain for Cold Stamping Formed Head Made of S30408 Austenitic Stainless Steel

Predicting Solidification Cracking Susceptibility of Stainless Steels Using Machine Learning

APPLICATION OF DIFFERENT DATA-DRIVEN METHODS IN MATERIAL PERFORMANCE PREDICTION OF 2.25CR-1MO-0.25V STEEL AFTER FORMING AND TEMPERING

Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel

Predicting mechanical properties of low-alloy steels using features extracted from Electron Backscatter Diffraction characterization

Machine learning for prediction of retained austenite fraction and optimization of processing in quenched and partitioned steels

Machine learning-based performance predictions for steels considering manufacturing process parameters: a review

An optimized machine-learning model for mechanical properties prediction and domain knowledge clarification in quenched and tempered steels

Enhancing Predictive Capabilities: Machine Learning Approaches for Predicting Mechanical Behavior in Friction Stir Welded Aluminum Alloys

Optimal Design of the Austenitic Stainless-Steel Composition Based on Machine Learning and Genetic Algorithm

Prediction of 316 stainless steel low-cycle fatigue life based on machine learning

Development of new materials for electrothermal metals using data driven and machine learning

Machine learning (deep learning) and visualization assisted ferrite content prediction in austenitic stainless steel

A machine-learning-based alloy design platform that enables both forward and inverse predictions for thermo-mechanically controlled processed (TMCP) steel alloys

Machine Learning-Assisted Prediction of Stress Corrosion Crack Growth Rate in Stainless Steel

Thermodynamic calculation-assisted design of 500 MPa high performance steel by machine learning

A micromechanics-based machine learning model for evaluating the microstructure-dependent rolling contact fatigue performance of a martensitic steel

Application of Machine Learning to Predict the Mechanical Properties of High Strength Steel at Elevated Temperature

Online prediction of mechanical properties of hot rolled steel plate using machine learning