Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Optimization‐improved thermal–mechanical simulation of welding residual stresses in welded connections

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

3D finite element analysis and optimization of welding residual stress in the girth joints of X80 steel pipeline

An efficient computational approach for heat source optimization in numerical simulations of arc welding processes

Simulating Welding Residual Stress and Deformation in a Multi-Pass Butt-Welded Joint Considering Balance Between Computing Time and Prediction Accuracy

Simulation and analysis of electron beam welding residual stress in thin-walled high-temperature alloy aeroengine structures

Numerical simulation and welding parameters optimization for minimum deformation of AHSS based on RSM & QGA

Multi-objective optimization of T-shaped bilateral laser welding parameters based on NSGA-II and MOPSO

Welding residual stress analysis of the X80 pipeline: simulation and validation

A physically consistent 2D residual stress model for approximating 3D effects in welding

Multi-objective Optimization of Weld Geometry in Hybrid Fiber Laser-Arc Butt Welding Using Kriging Model and NSGA-II

Geometric Parameters Optimization Design for Aluminum Alloy Welding Joint Based on Increasing Fatigue Strength

Numerical Simulation of Thermal–Mechanical Coupling in Laser–Metal Inert Gas Hybrid Welding Considering Grain Heterogeneity and Study of Phase Field Method during Solidification Process

Advances in numerical simulation of welding temperature field and stress and strain in structural parts

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Thermal-mechano-metallurgical coupled analysis of welding residual stress

Evolution of welding residual stresses during cyclic tests in welded tubular joints

Finite Element Analysis Model and Residual Stress Optimization in Rotor Welding Process

Numerical Optimization of the Welding Sequence for Mitigating Welding Deformation in Aluminum Pipe Structures by Using a Genetic Algorithm

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Tailoring complex weld geometry through reliable heat-transfer and fluid-flow calculations and a genetic algorithm