Abstract:To develop in-depth understanding of metallurgical phenomena for completeness, mechanical heterogeneity is kinetically and thermodynamically explained by thorough microstructure characterization of engineering materials, e.g. polycrystalline nickel-based superalloy, for alleviation of weldability-related problems during laser-induced keyhole fabrication. Because of nonequilibrium solidification behavior inside weld pool, finer γ phase dendrite substructure is confined to partition-resistant keyhole bottom part, coarser dendrite is crystallography-independently circumscribed at partition-vulnerable neck transition region of full penetration weld, and thus microstructure is lack of homogeneity. Abundance of segregation-driven eutectic phase or intermetallic phase in the interdendrite area throughout weld is essentially attributable to nonequilibrium solidification conditions, and morphologically increases susceptibility to mechanical properties deterioration. As a result of γ phase instability, Niobium-aided Laves/γ eutectic reaction in the vicinity of dendrite interstices at terminal stage of solidification contributes to severe dendrite boundaries brittleness, impairs mechanical properties, which is consistent with metallography and fractography results, and is more deleterious to weldability, since solute redistribution and supersaturation adversely exacerbate segregation behavior in the residual interdendrite liquid, especially asymmetric weld pool shape. There is inverse parabolic relationship between secondary dendrite arm spacing and solute partition coefficient, when location varies from nail-shaped weld upper site to bottom site. Chemical, microstructural and mechanical heterogeneities are more geometrically favorable in the curvature-related neck transition region. In addition, the mechanism of thermal, metallurgical and mechanical inhomogeneities, which are attributed to asymmetric weld pool shape, is consequently proposed. Untoward metallurgical phenomena, such as microstructure heterogeneity and brittle Niobium-rich Laves/γ eutectic phases mitigate strength, ductility and toughness of weld. In order to macroscopically and microscopically satisfy superior mechanical properties requirement, chemistry and microstructure of high quality weld are metallurgically controlled. Fruitful metallurgical information and mechanical data further support the reasonable explanations. It is imperative to progressively advance welding metallurgy, weldability and fabricability of intricate shape for welding defects minimization, suppress segregation and further develop mechanical properties through viable design and control of laser processing, simultaneously.

Numerical Simulation of Thermal–Mechanical Coupling in Laser–Metal Inert Gas Hybrid Welding Considering Grain Heterogeneity and Study of Phase Field Method during Solidification Process

Numerical simulation of thermo-mechanical coupling in laser-MIG hybrid welding utilizing dual volume heat sources

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Multi-Scale Simulation Of Grain Growth During Laser Beam Welding Of Nickel-Based Superalloy

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints

Multi-physics multi-scale simulation of microstructure evolution in entire welds of 2219-T6 aluminum alloy: An MPF-LBM study

A thermal–metallurgical model of laser beam welding simulation for carbon steels

Diffusion-limited Nonequilibrium Phase Transformation of Nickel/Aluminum Dissimilar Materials during Laser Welding Part I: Precipitation-strengthened Polycrystalline Nickel-based Superalloy

Thermal, Metallurgical and Mechanical Determinants of Laminar Nickel/Aluminum Dissimilar Alloys during Laser-material Interaction Part I: Nickel-based Superalloy

Numerical modeling of heat transfer and fluid flow in hybrid laser–TIG welding of aluminum alloy AA6082

Phase Field Study of Spacing Evolution During Wire and Laser Additive Manufacturing under Transient Conditions

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Numerical Simulation on Temperature Field in Laser-Plasma Arc Hybrid Welding

Numerical study of thermal fluid dynamics and solidification characteristics during continuous wave and pulsed wave laser welding

Modeling Rapid Solidification and Melting Processes for Multiphase Flows in a Welding Technology Application

Numerical Simulation on Flow and Heat Transfer in Weld Pool of Laser-Plasma Hybrid Welding

The influence of thermal distribution on macro profile and dendrites morphology based on temperature field simulation of 6061 aluminum alloy laser welded joint

Numerical modeling and simulation for laser beam welding of ultrafine-grained aluminium

Investigation of microstructure evolution on different planes in laser welding of aluminum alloy

Modelling of Microstructure Evolution during Laser Processing of Intermetallic Containing Ni-Al Alloys