Abstract:The microstructure of fusion welds significantly affects its mechanical properties. Existing studies on the dynamic evolution of welding molten pools have exposed great limitations in considering the flow field and the solid motion of free dendrites. In this paper, a multi-physics multi-scale coupling simulation of thermal-mass-flow was conducted to study the solidification behavior during the welding of 2219-T6 aluminum alloy. The developed multi-phase field lattice Boltzmann model realized the direct full coupling of phase, temperature, solute, solid motion, and flow fields. It is also combined with a continuous nucleation model to simulate heterogeneous nucleation and columnar-to-equiaxed transition (CET), and a transient growth-condition model to simulate the movement and solidification of the entire molten pool. The model and simulation results were verified by welding experiments, electron back-scattered diffraction, and scanning electron microscopy tests. Good agreements are achieved in terms of grain structure, dendrite morphology, and grain size. The undercooling field, fluid flow, solid motion, dendrite morphology, solute distribution, and quantitative parameters during the whole solidification process were analyzed in detail to reveal the true evolution of thousands of dendrites in fusion welds. The results show that solute convection caused by fluid flow significantly affects the dendrite morphology. The solid motion of equiaxed dendrites squeezes the solute enrichment layer and forms a solute hysteresis transport effect. A band of equiaxed dendrites gathers in front of the columnar dendrites and blocks their growth, forming a mechanical blockade mechanism of the CET process. The equiaxed dendrites dominated the subsequent solidification after CET is complete, and the final microstructure consists of brief-growth columnar dendrites and dense equiaxed dendrites. The top tangential flow causes a band of equiaxed dendrites with large gaps in the upper weld, which was presumed to be the source of surface cracks in welds with high residual stress.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the multi - physical - field and multi - scale simulation of microstructure evolution in the entire welding pool of 2219 - T6 aluminum alloy. Specifically, the paper focuses on the influence of fluid flow, solid - state movement, heterogeneous nucleation of free dendrites and columnar - to - equiaxed transition (CET) in the welding pool on microstructure evolution during gas tungsten arc (GTA) welding. Existing research has limitations when considering these dynamic processes, especially insufficient consideration of the flow field and solid - state movement of free dendrites. Therefore, this paper proposes a multi - phase - field lattice Boltzmann model (MPF - LBM), combined with a continuous nucleation model and a transient growth condition model, to achieve direct full - coupling simulation of phase, temperature, solute, solid - state movement and flow field, thereby more accurately revealing the real evolution process of thousands of dendrites in the welding pool. ### Main research questions: 1. **Influence of fluid flow on dendrite morphology**: Study how solute convection caused by fluid flow significantly affects the morphology of dendrites. 2. **Solid - state movement of equiaxed dendrites**: Explore how the solid - state movement of equiaxed dendrites squeezes the solute - enriched layer to form the solute - lagged transport effect. 3. **Columnar - to - equiaxed transition (CET) mechanism**: Analyze how equiaxed dendrites gather in front of columnar dendrites, preventing their growth, and form the mechanical blocking mechanism of the CET process. 4. **Composition of the final microstructure**: Study how equiaxed dendrites dominate the subsequent solidification process after CET is completed, and the final microstructure consists of short columnar dendrites and dense equiaxed dendrites. 5. **Source of surface cracks**: Explore how the top tangential flow leads to the appearance of an equiaxed dendrite band with a large gap in the upper weld, which may be the source of surface cracks in high - residual - stress welds. Through these studies, the paper aims to provide a more comprehensive and accurate method to understand the dynamic evolution of microstructure during GTA welding, thereby better controlling macroscopic properties.

Multi-physics multi-scale simulation of microstructure evolution in entire welds of 2219-T6 aluminum alloy: An MPF-LBM study

Systematical factor analysis of dendrite morphology and solute distribution in entire welding molten pool of Al Cu alloy: An MPF-LBM study

Multi-physics Multi-Scale Simulation of Unique Equiaxed-to-columnar-to-equiaxed Transition During the Whole Solidification Process of Al-Li Alloy Laser Welding

Numerical Modeling of Welding Porosity Formation and Dendrite Growth of 6xxx Aluminum Alloys

Multi-scale Simulation of Solidification Behavior and Microstructure Evolution During Vacuum Electron Beam Welding of Al-Cu Alloy

Physics-driven Modeling of Electron Beam Welding of Al-Cu Alloys from Molten Pool Flow, Microstructure to Mechanical Properties

In-situ EBSD-DIC Simulation of Microstructure Evolution of Aluminum Alloy Welds

Multi-scale Three-Dimensional Simulation of the Solidification Microstructure Evolution in Laser Welding of Aluminum Alloys under Dynamic Spatial Thermal Cycling

[O39] Modelling of Solidification Structure Evolution and Solute Segregation in a Weld Pool Using a Multi-Scale Approach

Multi-physics multi-scale simulation of the solidification process in the molten pool during laser welding of aluminum alloys

Multi-scale Simulation of Dendrite Growth for Direct Energy Deposition of Nickel-Based Superalloys

A Phase-Field Simulation of Columnar-to-equiaxed Transition in the Entire Laser Welding Molten Pool

Multi-scale Simulation of Grain/sub-Grain Structure Evolution During Solidification in Laser Welding of Aluminum Alloys

An integrated model for the post-solidification shape and grain morphology of fusion welds

Research on Microstructure and Mechanical Properties of Square Wave Alternating Current Tungsten Inert Gas Welded Joints in 2219-T6 Aluminum Alloy

Modeling of Microstructure Evolution Coupled with Molten Pool Oscillation During Electron Beam Welding of an Al-Cu Alloy

Microstructure Development During Explosive Welding of Metal Foil：morphologies, Mechanical Behaviors and Mechanisms

Inhomogeneous microstructure distribution and its formation mechanism in deep penetration laser welding of medium-thick aluminum-lithium alloy plates

Investigation of microstructure evolution on different planes in laser welding of aluminum alloy

Molten Pool Behavior and Solidification Characterization in Steady Magnetic Field Assisted Laser-Mig Hybrid Welding of Aluminum Alloy

Multi-scale modelling of the microstructure evolution during friction stir welding of 2195 Al–Li alloy