Abstract:In this study, both the digital image correlation (DIC) and depth-sensing indentation (DSI) measurements were performed to investigate the non-uniform local mechanical behaviors of HR3C/T92 dissimilar welded joint during plastic deformation. The macro-scale DIC experiments showed the uneven distribution and transfer phenomena of the plastic deformation in the welded samples. The grain-scale DIC measurements further revealed that the strain localization was closely related to the local microstructures. To understand the correlation of the non-uniform deformation behavior with the local microstructure in the welded samples, the electron backscatter diffraction (EBSD) tests in the as-received state and ex-situ optical microscope (OM) observations during the tensile deformation process were conducted. The slip morphologies were found to be different across the welded joint, and the grain-scale strain localizations were proved to be closely related with the behaviors of the slip bands. Moreover, ex-situ DSI tests were also carried out to determine the local mechanical properties of the HR3C/T92 dissimilar welded joint during the tensile deformation process. The basic elasto-plastic properties (elastic modulus, yield strength, and hardening parameters) in particular zones of the welded joint were estimated by using the multi-fidelity deep neural network method combined with indentation characteristic parameters. The non-uniform deformation behavior of the HR3C/T92 welded joint during tensile loading was further simulated by using the finite element method based on the estimated elasto-plastic properties of the welded joint, and a general agreement between the simulated result and experimental tensile curve has been obtained.

In-situ investigation of microstructure-dependent deformation behavior of an electron-beam welded Ni Co based superalloy

Microstructure-dependent mechanical properties of an electron beam welded Ni-Co based superalloy

DIC/DSI Based Studies on the Local Mechanical Behaviors of HR3C/T92 Dissimilar Welded Joint During Plastic Deformation

Investigation of microstructure and mechanical properties in dissimilar-metal welding between ferritic stainless steel and Co-based superalloy using electron beam welding

Microstructure and mechanical properties of electron beam welding of AlCoCrFeNi 2.1 eutectic high entropy alloy

On the investigation of microstructure and mechanical properties of the AlCoCrFeNi 2.1 /316 L dissimilar spot-welded joint

Analysis on the Microfissuring Behavior in the Heat-affected Zone of Electron-beam Welded Nickel-based Superalloy

High Resolution Analysis of Elemental Partitioning in Nickel-Base Superalloy Welds Using Atom Probe Field Ion Microscopy

Microstructure and Mechanical Properties of the IC10/GH3039 Dissimilar Electron Beam Welded Joint

On the Investigation of Microstructure and Mechanical Properties of the AlCoCrFeNi2.1/316 L Dissimilar Spot-Welded Joint

Microstructure and mechanical properties of electron beam welded joints of GH3128 and CoCrFeNi high-entropy alloy

Effect of heat input on microstructure and mechanical properties of IC10 Ni3Al-based superalloy electron beam welding joint

Effect of texture evolution and defect on the crack initiation of a Ni‐based superalloy electron beam welded joint

Study on Microfissuring Damage of Ni-base Superalloy under Thermal Shock of Electron-beam Welding

Stray grain formation, thermomechanical stress and solidification cracking in single crystal nickel base superalloy welds

In-situ investigation of damage mechanisms in duplex AlCoCrFeNi2.1 high entropy alloy

Optimizing for IC10 Single Crystal Ni3Al-based Alloy Joint by Electron Beam Welding with Chemical Composition Controlling

The Effect of Microstructure and Welding-Induced Plasticity on the Strength of Ni–Mo–Cr Alloy Welds

Investigation of microstructures and strengthening mechanisms in an N-doped Co-Cr-Mo alloy fabricated by laser powder bed fusion

Microstructure, mechanical properties and strengthening mechanisms of IN738LC alloy produced by Electron Beam Selective Melting

Microstructure and mechanical properties of cemented carbide to steel joints by electron beam welding