Abstract:High entropy alloys (HEAs) have garnered significant attention in recent years, primarily focusing on alloying design and thermal processing. The objective of this study was to investigate the mechanical response of Al0.3CoCrFeNi, a representative HEA, under various stress states, temperatures, and strain rates, aiming to establish its constitutive equation and fracture criteria. Employing a hybrid FEM/EX approach, the constitutive behaviour of the alloy was characterized using the modified Johnson-Cook (MJC) model, while the fracture properties were assessed using the Hosford-Coulomb (HC) equation. Experimental findings highlighted the remarkable tensile strength (578.1 MPa) and ductility (69%) of the as-cast Al0.3CoCrFeNi at room temperature. However, at elevated temperatures ranging from 400 °C to 650 °C, a reduction in ductility was observed, accompanied by serration behaviour. Notably, precipitation hardening was detected at 800 °C, indicative of strengthening through precipitate formation. Additionally, Al0.3CoCrFeNi exhibited significant strain rate sensitivity and a positive strain rate effect, emphasizing its dynamic response under different loading conditions. The accuracy of the constitutive model and fracture criteria was validated through the examination of deformation and fracture modes in Taylor impact tests. The MJC model demonstrated predictions within a 10% deviation from experimental data, while the HC fracture criterion, accounting for stress triaxiality and Lode parameters, effectively predicted shear fracture in the projectiles. Crack formation in the projectiles resulted from a combination of tension and shear, followed by propagation at a 45° angle under combined compression and shear loading. This comprehensive study enhances understanding of the mechanical properties of Al0.3CoCrFeNi, providing valuable insights for its application in engineering, particularly in impact protection.

In-situ investigation of damage mechanisms in duplex AlCoCrFeNi2.1 high entropy alloy

Unleashing the microstructural evolutions during hot deformation of as-cast AlCoCrFeNi 2.1 eutectic high entropy alloy

Dynamic mechanical properties and microstructure evolution of AlCoCrFeNi2.1 eutectic high-entropy alloy at different temperatures

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy

Study on the strengthening mechanism of AlCoCrFeNi2.1 eutectic high-entropy alloy

Investigation of mechanical behavior, constitutive modeling, and fracture criteria for as-cast Al0.3CoCrFeNi high entropy alloy

The influence of heat treatment on microstructure and mechanical response of a newly developed non-equimolar AlCrCuFeNi high-entropy alloy: Experiments and numerical modeling

In-situ microstructural evolution during tensile loading of CoCrFeMnNi high entropy alloy welded joint probed by high energy synchrotron X-ray diffraction

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Nanoscale Origins of the Damage Tolerance of the High-Entropy Alloy CrMnFeCoNi

Microstructural origins of enhanced work hardening and ductility in laser powder-bed fusion 3D-printed AlCoCrFeNi 2.1 eutectic high-entropy alloys

Simultaneously Enhanced Strength-Ductility of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Via Additive Manufacturing

High strength and ductility in a dual-phase hetero-structured AlCoCrFeNi2.1 eutectic high-entropy alloy by powder metallurgy

Molecular Dynamics Simulations of Micromechanical Behaviours for AlCoCrFeNi2.1 High Entropy Alloy during Nanoindentation

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys

High-strength AlCoCrFeNi2.1 eutectic high entropy alloy with ultrafine lamella structure via additive manufacturing

Phase-Specific Damage Tolerance of a Eutectic High Entropy Alloy

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Probing the microstructure and deformation mechanism of an FeCoCrNiAl0.5 high entropy alloy during nanoscratching: a combined atomistic and physical model study