Abstract:The performance of welded Ni-based superalloys at high temperatures is essential to be evaluated due to their particular service environment for aero-engines and high-speed aircrafts. The tensile properties and related microstructural evolutions such as the carbide precipitate and grain of a laser-welded Ni-based alloy were experimentally and numerically investigated at different temperatures (20, 300, 500, 800 °C). The results show that at room temperature, the strength of the Base Material (BM) was slightly smaller, with a difference of less than 1%, than the Welded Material (WM), which can be attributed to the more uniformly distributed needle-shaped carbide precipitates in the WM than those nonuniformly coarser spherical ones in the BM. While at 300 °C and 500 °C, the strength of WM decreased more obviously compared with that of BM due to the more apparent growth of grain: 13.52% loss in yield strength in WM alloys as compared with BM alloys at 300 °C, and 16.57% at 500 °C. At 800 °C, the strength of BM and WM both decreased to a similar level due to Dynamic Recrystallization (DRX). However, a much higher elongation was observed for the BM than WM (less than 50% of BM), which can be attributed to the enhanced dislocation accumulation capability of the large spherical carbides along grain boundaries on the fracture surface in BM. Furthermore, a unified model considering the welding effects on both microstructures (dislocation, carbides, and grain) and mechanical properties evolutions at different temperatures was developed and validated. Based on this model, the key temperature ranges (20–600 °C) where apparent weakening of strength and uniform plasticity occurs for welded structures were identified, providing a direct guidance for potential structure and process design.

Microstructure-dependent mechanical properties of an electron beam welded Ni-Co based superalloy

In-situ investigation of microstructure-dependent deformation behavior of an electron-beam welded Ni Co based superalloy

The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy

Investigation of microstructure and mechanical properties in dissimilar-metal welding between ferritic stainless steel and Co-based superalloy using electron beam welding

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Effect of heat input on microstructure and mechanical properties of IC10 Ni3Al-based superalloy electron beam welding joint

Microstructure and mechanical properties of electron beam welding of AlCoCrFeNi 2.1 eutectic high entropy alloy

Microstructure and mechanical properties of electron beam welded joints of GH3128 and CoCrFeNi high-entropy alloy

Microstructure and Mechanical Properties of the IC10/GH3039 Dissimilar Electron Beam Welded Joint

Microstructure and Properties of 3D-GH3625 Electron beam welded

Study on Microfissuring Damage of Ni-base Superalloy under Thermal Shock of Electron-beam Welding

Experiments and modeling of microstructural and mechanical behaviors of laser-welded Ni-based superalloy at high temperatures

Effect of γ' phase and microtwins on the microstructural evolution and mechanical properties of a novel Ni–Co base superalloy

Microstructure and Mechanical Properties of Welded Joints of Cr18Ni30Mo2Al3Nb Alloy

The microstructure evolution and its effect on the mechanical properties of a hot-corrosion resistant Ni-based superalloy during long-term thermal exposure

Microstructures and Mechanical Behaviors of NiAlFe Intermetallic Compounds

Micromechanical testing and microstructure analysis of as-welded and post-weld heat-treated Ti-6Al-4V alloy

Effect of microstructure on temperature dependence of deformation behavior in polycrystalline CoNi-based superalloy

Microstructure and Mechanical Properties of Laser Welded and Post-Weld Heat-Treated K439B Superalloy

Microstructure and Mechanical Properties of Inconel713C Ni3Al-based Superalloy Joint Welded by Electron Beam Feeding Wire Welding Technology

Microstructural Evolution and Mechanical Properties of Laser Beam Welded AlxCoCrFeNi High Entropy Alloys