Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Zhouqing Zhang,Qingqing Ding,Yilun Gong,Xiao Wei,Ze Zhang,Hongbin Bei
DOI: https://doi.org/10.1016/j.jmrt.2023.09.154
2023-01-01
Abstract:A L1(2)-structured precipitation (gamma') strengthened Co-based superalloy is identified based on thermodynamic calculation and experimental validation. An alloy with composition of Co9Al5Mo30Ni2Ta10Cr is fabricated to explore the relationships among processing, mi-crostructures and mechanical properties. Typical gamma/gamma' two-phase microstructures have been obtained after heat treatments, where the spherical gamma' phase with diameter of similar to 100 nm is uniformly distributed in the face centered cubic (FCC) matrix. The L1(2) structured gamma'-(Ni, Co)(3)(Al, Ta) phase can be stabilized, which coherently precipitates in the FCC matrix (gamma) during aging treatment. The alloy exhibits promising strength with comparison to traditional Co-based superalloys at a temperature range from room temperature (RT) to 1000 degrees C. The predominant deformation mechanism transits from shearing of dislocation pairs to dislocations bypassing gamma' phase when deformation temperature increases from RT to 1000 degrees C. (c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
What problem does this paper attempt to address?