Abstract:The Ni-Fe-based superalloy GH4169 (Inconel718) is widely used for several critical gas-turbine components which are hot forged. Its microstructure and property are sensitive to the parameter adjustment during hot working process. To obtain required low-cycle fatigue and fracture properties, it is essential that the microstructure is controlled during preheating and heat treatment. The evolution of non-uniform microstructure during hot working is more complicated than that of uniform microstructure. On the other hand, various secondary phases can be observed in GH4169 alloy, thus it is important to investigate the effect of secondary phases on the microstructure evolution during forging process. In this work, the mechanisms of non-uniform microstructure evolution in GH4169 alloy were studied by analyzing the evolution of secondary phases, grain boundary misorientation, grain size and interactions of dislocation. It is found that the volume fraction of 8 phase increases with the increasing of temperature and heating time at the lower temperature. While at the higher temperature, it decreases monotonously with the temperature increasing, but increases first and then decreases to stable value with time increasing. The pinning effect of secondary phases in GH4169 alloy can be concluded that the gamma '' phase and 8 phase precipitated within the grains retain movement of dislocation, the 8 phase precipitated at the grain boundary hinders the nucleation and growth of recrystallized grains, and the carbides limits the grain growth. The frequency of low angle grain boundary decreases with temperature and time increasing, and the mobility of low angle grain boundary increases with temperature increasing. The uniformity of microstructure and the size of equaxied subgrain increases with heating temperature and time increasing. Continuous recrystallization of elongated grain occurs at specific conditions. The mechanisms of non-uniform microstructure evolution during heating process can be concluded as sub grain growth, recrystallized grain growth, and anneal twinning nucleation and growth. The recrystallized grains are formed by the growth of subgrains conducted by the rotation of low angle grain boundary and the movement of dislocation. When the grain growth is pinned, the mechanisms for the energy dissipation is the nucleation and growth of anneal twinning. And the growth of anneal twinning promotes the generation of low angle grain boundaries at the tip of partial anneal twinning.

Probing the formation mechanism of hierarchical microstructures in experimental Ni-based superalloys

Formation and Evolution of Hierarchical Microstructures in a Ni-based Superalloy Investigated by in Situ High-Temperature Synchrotron X-ray Diffraction

Mapping the evolution of hierarchical microstructures in a Ni-based superalloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Influence of Cooling Scenarios on the Evolution of Microstructures in Nickel-Based Single Crystal Superalloys

Mechanisms of Non-Uniform Microstructure Evolution in Gh4169 Alloy During Heating Process

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

Homogenizing Effects of Co on Multi-Scale Elemental Distribution in Ru-containing Ni-based Single Crystal Superalloys

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Deformation Behavior of Nickel-Based Superalloys with Bimodal Γ′ Size Distribution Studied by In-Situ Neutron Diffraction Combined with Evpsc Modeling

Tailoring of nanoscale γ' precipitates and unveiling their strengthening mechanisms in multimodal nickel-based superalloy GH4720Li

Effect of Γ Forming Element Additions on the Homogenization Behavior and Formation of Hierarchical Microstructures in Ni-based Superalloys

Characterization of the Microstructure Evolution and Microsegregation in A Ni-Based Superalloy under Super-High Thermal Gradient Directional Solidification

The formation mechanism of eutectic microstructures in NiAl-Cr composites

Hierarchical phase separation behavior in a Ni-Si-Fe alloy

Formation Mechanism and Thermal Stability of Γ' and Γ" Compact Co-Precipitated Nanostructure in Directed Energy Deposited Ni-based Alloy

Unraveling the Formation Mechanism of Abnormally Large Grains in an Advanced Polycrystalline Nickel Base Superalloy

Microstructures and Mechanical Properties of a L1 2 -structured precipitation Strengthened Co-based Superalloy

Effect of γ' phase and microtwins on the microstructural evolution and mechanical properties of a novel Ni–Co base superalloy

Size-dependent Microstructure Evolution and Formation Mechanisms During the Gas Atomization Process of FGH4113A Ni-based Superalloy Powder

Microstructural Evolution of Wrought-Nickel-Based Superalloy GH4169