Abstract:Polycrystalline heterogeneities of grain growth, phase transformation and tensile properties are discussed by metallography, spectroscopy and fractography when choosing laser welding with butt-joint configuration to satisfactorily minimize effect of inappropriate weld pool shape on microstructure and mechanical properties of γʹʹ precipitation hardable nickel-based superalloy in aerospace industry. There is parabolic relationship between weld penetration and diffusion-limited nucleation, growth and coarseness of secondary dendrite arm spacing alongside fusion boundary through nonequilibrium solidification process, which is dendritically susceptible to grain growth variation and metallurgical discontinuities. The amount, size, morphology and distribution of nonequilibrium intermetallic phase near the dendrite boundaries are kinetically and thermodynamically rely on weld pool shape whose crystal structure is incoherent with γ solid solution austenite phase and increases preference for crack initiation and propagation of brittle intergranular and ductile dimple fracture failures to enormously contribute to losses of strength and ductility. Unsymmetrical keyhole weld is thermometallurgically inconvenient for amelioration of microstructure and mechanical properties on either side, and adversely mitigates resistance to hypereutectic-aided dendrite embrittlement. Beneficial grain refinement and suppression of detrimental nonequilibrium intermetallic phase at the same time are challenging. This problem is an integral part of inhomogeneous microstructure and mechanical properties. The finer grain size occurs, the larger grain boundary area is available for Laves/γ eutectic-type reaction and vice versa. Contributions of coarse grain kinetics and metallurgical reaction thermodynamics to weld disintegration and fracture failure mechanism of tensile properties are explained by microstructure characterization of multicomponent and multiphase weld. Finally, it is imperative to dendritically balance these important factors to minimize inevitable interface solidification products and anomalous substructure growth, and reasonably advance superior mechanical properties of reliable weld.

Stray grain formation, thermomechanical stress and solidification cracking in single crystal nickel base superalloy welds

The Effects of Stress Triaxiality, Temperature and Strain Rate on the Fracture Characteristics of a Nickel-Base Superalloy

Microstructural development in single crystal nickel base superalloy welds

Effects of Thermal Stress on the Formation and Cracking Behavior of Nickel-Based Superalloys by Selective Laser Melting Based on a Coupled Thermo-Mechanical Model

In-situ Observation of Crack Initiation and Propagation in Ni-based Superalloy with Film Cooling Holes During Tensile Test

Microstructure Evolution Mechanisms in Nickel-Based Single Crystal Superalloys under Multiaxial Stress State

Microstructure Characterization and Damage Coupled Constitutive Modeling of Nickel-Based Single-Crystal Alloy with Different Orientations

Effects of Treatment on Microstructure and Deformation Behavior of Dissimilar Welded Joint Between Single Crystal and Polycrystalline Superalloy

Microstructure evolution in a single crystal nickel-based superalloy joint by linear friction welding

Ultra high-temperature deformation in a single crystal superalloy: Meso-scale process simulation and micro-mechanisms

Achieving Polycrystalline Transformation and Microstructural Segregation Reduction of Nickel-Based Single Crystal Super-Alloys by Ultrasonic Pulse Arc Welding

Microstructure and Mechanical Property of Linear Friction Welded Nickel-Based Superalloy Joint

Effect of crack on morphology evolution of the precipitates in Nickel-based superalloys under applied stress

Analysis on the Microfissuring Behavior in the Heat-affected Zone of Electron-beam Welded Nickel-based Superalloy

Diffusion-limited Nonequilibrium Phase Transformation of Nickel/Aluminum Dissimilar Materials during Laser Welding Part I: Precipitation-strengthened Polycrystalline Nickel-based Superalloy

Evolution of Grain Structure, Γ’ Precipitate and Hardness in Friction Welding and Post Weld Heat Treatment of a New Ni-Fe Based Superalloy

Effect of texture evolution and defect on the crack initiation of a Ni‐based superalloy electron beam welded joint

Effect of Welding Thermal Treatment on the Microstructure and Mechanical Properties of Nickel-Based Superalloy Fabricated by Selective Laser Melting

Welding hot cracking characteristics and fracture mechanisms of nickel‐based alloy NS1402 under different constraint conditions

On Post - Weld Heat Treatment of a Single Crystal Nickel - Based Superalloy Joint by Linear Friction Welding

Study on Microfissuring Damage of Ni-base Superalloy under Thermal Shock of Electron-beam Welding