Abstract:Non-metallic inclusions are known to be a significant cause of microstructural deterioration in the single-crystal Ni-based superalloy DD6, resulting in the initiation and propagation of damage. Previous experimental results have revealed that AlN particles are dispersed individually in several regions within the γ′ free zone, situated beneath the oxide layer. However, areas where these particles agglomerate, whether they contain solely AlN particles or clustered with Al2O3 particles, are the most damaging and attractive sites for surface cracks arising in the oxide layers. Interfacial debonding between the particle and matrix, particle fracture, and matrix cracking caused damage initiation in the agglomerate region. To study the damage behavior of the agglomerate area belonging to the γ′-free region and how those particles influence the mechanical drivers of damage nucleation, we developed a new framework based on the Extended Finite Element Method (XFEM) and crystal plasticity (CP) theory. We employed a creep-damage model in a crystal plasticity (CP) framework combined with the XFEM approach to predict the micro-cracks in the agglomerate area (γ′-free zone). We also used the cohesive zone method (CZM) to simulate the interfacial debonding between the γ′ free region and each of the AlN and Al2O3 particles, and cohesive behavior-based XFEM is used to model the particle fracture. The fracture properties of the interface layer between the γ′ free zone and particles, as well as the agglomerated particles, were determined., followed by an assessment of the effects of particle agglomerate on damage mechanisms, including interfacial debonding, particle fracture, and matrix cracking in the agglomeration region. Interfacial partial decohesion of agglomerated AlN particles was prevalent with interparticle microcracking, making the agglomeration area between the AlN particles attractive for surface cracks. In contrast, the damage initiation delay with relatively low rates caused by particle fracture was the damage behavior of the agglomerated Al2O3 model. The consistency between numerical and experimental results confirmed the ability of this framework to capture microstructure-sensitive microcracks.

Effects of crack-γ/γ' interface relative distributions on the deformation and crack growth behaviors of a nickel-based superalloy

Effects of Stress State, Crack—γ/γ′ Phase Interface Relative Locations and Orientations on the Deformation and Crack Propagation Behaviors of the Ni-Based Superalloy—A Molecular Dynamics Study

Interfacial dislocation evolution and yield mechanism of nickel-based single crystal superalloy: A molecular dynamics research

Molecular dynamics simulation of the γ’ phase deformation behaviour in nickel-based superalloys

Nano-cutting deformation characteristics and atomic-scale behavior of two-phase γ/γ′ nickel-based single crystal superalloy

Effect of crack on morphology evolution of the precipitates in Nickel-based superalloys under applied stress

Effects of particle agglomeration in the γ′-free zone on the damage evolution of single-crystal Ni-based superalloys

The effect of grain boundary structures on crack nucleation in nickel nanolaminated structure: A molecular dynamics study

Twin and phase boundaries synergistic effect on multiscale dynamic fracture in Ni-based deformed superalloy

A Molecular Dynamics Study on the Dislocation-Precipitate Interaction in a Nickel Based Superalloy During the Tensile Deformation

Molecular dynamics simulation of crack propagation behaviors at the Ni/Ni3Al grain boundary

Influence of the alloying elements Re, Co and W on the propagation of the Ni/Ni3Al interface crack

Effects of Re, W and Co on dislocation nucleation at the crack tip in the γ-phase of Ni-based single-crystal superalloys by atomistic simulation

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure

Influence of Nanoscale Inhomogeneity Incorporating Interface Effect on Crack Nucleation at Intersection of Twin and Grain Boundary in Nanocomposite

γ′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction

Experimental Study of As-Cast and Heat-Treated Single-Crystal Ni-Based Superalloy Interface Using TEM

Microstructural insights into fatigue short crack propagation resistance and rate fluctuation in a Ni-based superalloy manufactured by Laser powder bed fusion

Crack initiation and propagation dominated by strain localization in quasi-single crystal and poly-crystalline of a Ni-based complex concentrated alloy

Effect of biphasic interface on mechanical properties and deformation mechanism of nickel base alloy

Micro-strain and cyclic slip accumulation in a polycrystalline nickel-based superalloy