Abstract:So far, the research on topology optimization against noise has mainly addressed frequency-domain problems, while time-domain analysis is also widely used in practical engineering. Nonetheless, the topology optimization work on the latter was rarely reported due to its complexity. This paper presents a new topology optimization scheme of bi-material curved shell structure to reduce the time-domain noise generated by transient vibration. A finite element formulation for an eight-node curved shell element is presented. The Newmark integral method is employed to calculate transient responses, and the obtained results are input into the time-domain boundary element method to predict transient sound pressure. In the optimization model, the volumetric densities of material in a bi-material interpolation model constructed by the solid isotropic material with penalization (SIMP) model are chosen as the design variables; the time integral of the squared sound pressure on structural surfaces or prescribed reference points in acoustic medium over a specified time interval of interest is taken as the objective function; and the constraint on material volume is considered. A volume-preserving Heaviside penalization is introduced to suppress gray elements. Furthermore, the calculation of time-domain sound radiation sensitivity is transformed into the following two processes: (a) the derivation of transient response based on the Newmark integral method; (b) the derivation of transient sound pressure based on the discrete time-domain boundary integral equation. Numerical examples demonstrate the validity of the approach proposed in this paper. The influences of volume-preserving Heaviside penalization, volume constraint, loading position and form, and selection of objective function on the optimal design are discussed.This article is protected by copyright. All rights reserved.

Topology optimization of bi‐material curved shell structures for minimizing time‐domain sound radiation

Design optimization and sensitivity analysis on time-domain sound radiation of laminated curved shell structures

Topology Optimization of Vibrating Bi-Material Structures with Respect to Sound Radiation

Stiffeners layout design for noise reduction using topology optimization

Minimization of Sound Radiation from Vibrating Bi-Material Structures Using Topology Optimization

Minimization of Sound Radiation in Fully Coupled Structural-Acoustic Systems Using FEM-BEM Based Topology Optimization

A FEM/BEM Based Topology Optimization of Submerged Bi-Material Shell Structures under Harmonic Excitations

Topology-Boundary Optimization of Coupled Structural-Acoustic Systems

Topology optimization of damping layers for minimizing sound radiation of shell structures

Simultaneous optimization of materials and fiber angles on laminated composite shells for reducing transient sound radiation

Topology Optimization of Sound Absorbing Layer for the Mid-Frequency Vibration of Vibro-Acoustic Systems

An Objective Function for the Topology Optimization of Sound-Absorbing Materials

Topology optimization of continuum structures for natural frequencies considering casting constraints

Design of Absorbing Material Distribution for Sound Barrier Using Topology Optimization

Acoustic Topology Optimization Of A Plate With Constrained Layer Damping Treatment Coupled With A Cavity

Microstructural Topology Optimization with Respect to Sound Power Radiation

Vibro-acoustic Design of Plate Using Bi-Material Microstructural Topology Optimization

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Topology Optimization of Damping Layers in Shell Structures Subject to Impact Loads for Minimum Residual Vibration

A Microstructural Topology Optimization Approach for Vibro-Acoustic Interaction Systems Based on the Piecewise Constant Level Set Method

Topological Design of Vibrating Structures with Respect to Optimum Sound Pressure Characteristics in a Surrounding Acoustic Medium