Experimental study of reducing combustion noise on high speed DI diesel engine in ship
Pinǵ Wang,XiGeng Song,DongXin Xue,YuLin Ge,Haitao Zhou,Yougen Sun,XiaoWen Ma
2006-01-01
Abstract:There are usually two methods for the vibration and noise control of high speed DI (direct-injection) diesel engine in ship (P e<200 kW, n>1000 r/min): one is to control vibration, the other is to isolate vibration and noise against the inciting source. The first one is better than the second, as it is basic method to reduce inciting force and control noise source. It is key and difficult to reduce combustion noise for control of noise source. For the experimental diesel engine, high pressure common rail electronically-controlled fuel injection system and fuel pilot injection technology were applied, the effects of common rail pressure, fuel pilot injection timing, fuel pilot injection quantity, fuel pilot injection interval angle were analyzed on diesel engine performance, and main affecting factors on combustion noise were analyzed specially. The relationships between combustion noise and fuel injection rate, combustion process, and heat release rate were discussed. Modern signal gathering, processing and analyzing technology were used by MATLAB toolbox writing program. With SYSNOISE software numerical simulation, the computed results and the test data were analyzed, combustion noise were distinguished and separated from the total noise. The results show that high fuel injection pressure, small diameter of fuel injection hole and exact fuel pilot injection parameters match to inlet-air system and combustion chamber. Based on better combustion process, the fuel injection rate and heat release rate were optimized, hence, performance of power, economy, exhaust and noise were improved. A new method to design low noise diesel engine is provided, so that operating cost is reduced. It is adaptable to circumstance requests for NVH (noise and vibration harshness) in modern high speed DI diesel engine in ship.