Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Sound Insulation Performance and Transmission Noise of Engine Covers of Diesel Engine

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Numerical Analysis on Acoustic Characteristics of Automotive Exhaust Muffler by Transfer Matrix Method

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Simulation and Improvement of Silencer at Turbocharger Outlet

Influence of load impedance on performance of thermoacoustic engine

Engine Noise Source Identification with Different Methods

Acoustic Prediction Method of Engine Thin-Walled Parts Considering Transmission Noise

Vibration and noise reduction for a 490 diesel engine body

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

Experimental Study on Diesel Engine Noise

Coupled Analysis of Engine Noise and Interior Noise of an Automobile

Study of NVH performance improvement for a four-cylinder diesel engine body

Identification and Evaluation of Diesel Engine Noise Source Based on Acoustic Intensity

Effect of Engine Compartment Structure on Interior Noise during Acceleration

Experimental Validation of Sound Quality Simulation and Optimization of a Four-Cylinder Diesel Engine

Coupled optimization of internal combustion engine radiated noise and interior noise

Experimental Study on the Noise Source Identification of a Diesel Engine of Passenger Car

Numerical simulation and test validation for performance of a muffler in an exhaust pipe