Abstract:The low-frequency broadband noise generated by vehicles may be disturbing for the neighboring residents when vehicles enter or leave underground (or semi-underground) parking garages. A special structural ramp was designed to reduce noise emissions at the entrance or exit of garages. Two-layer steel grilles with rectangular slots evenly distributed, on which the tires of vehicles run, were installed on the original cement ramp. Damping perforated plates sandwiched between the upper and under grille layers fixed on the original cement ramp, formed a resonance sound absorption structure together with the cavity in the layer under the grille. In addition, aluminum foams were embedded in the upper grille layer, and waterproof porous sound absorption materials filled the cavity of the under layer. Field tests using light cars with less than 8 seats were performed to evaluate the effect of the special structural ramp on noise reduction compared to the original concrete ramp. Results show that, when all seats were taken, noise reduction in the A-weighted level of 8 dB on the uphill ramp and 6 dB at the downhill ramp were achieved at the distance of 0.5 m away from the tires outside the vehicle, and a 13 dB and a 8 dB reduction at ears of the passenger respectively. Meanwhile, only a reduction of 2 dB or less could be achieved with further treatment of sound absorption on the middle of the pavement.

Effect of Engine Compartment Structure on Interior Noise during Acceleration

Control of Noise at the Entrance or Exit of Parking Garages

Coupled Analysis of Engine Noise and Interior Noise of an Automobile

Auto-Body Structure Noise Performance Analysis and Optimization Research

Coupled optimization of internal combustion engine radiated noise and interior noise

Sound Insulation Performance and Transmission Noise of Engine Covers of Diesel Engine

Influence of Exhaust Hanger Locations on Vehicle Interior Noise Level

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Analysis of Vibration and Radiated Noise Influenced by Reinforcing Plate in an In-Line 6-Cyilnder Engine

Vibration and noise reduction for a 490 diesel engine body

Experimental Study on Diesel Engine Noise

Interior Noise Analysis of a Non-load Type Body SUV

Investigation on Main Noise Sources of Vehicle Gasoline Engine by Sound Intensity Measurement

Radiation Noise of External Thin-Wall Components in Diesel Engine

Study of NVH performance improvement for a four-cylinder diesel engine body

Research on Interior Noise Control of the Rear Seats in Vehicle

Study of Noise Source Identification and Noise Control of A Gasoline Engine

Vibration and Acoustic Analysis of a Mobile Device

TRANSFER PATH ANALYSIS AND CONTROL OF AUTOMOTIVE INTERIOR STRUCTURE-BORNE NOISE GENERATED BY A POWERPLANT

Experimental Study on the Mechanism of Engine Combustion and Piston Slapping Noises

Analysis and study of the transmission path based on the body and NVH