Abstract:Vertically aligned carbon nanotube (CNT) arrays with ordered nanostructure and extraordinary performance have become an important advanced material. CNTs were synchronously grown with high density to form aligned morphology, while the fine agglomerated structure was sensitive to the packing style of catalyst particles. Thus, synthesis of CNT arrays in a fixed bed or fluidized bed is an important issue. We reported that CNT arrays were grown from ethylene on a lamellar catalyst in a fixed bed reactor and a fluidized bed reactor, respectively. The reactor style affected the intercalated growth of CNT arrays greatly. The qualities of CNT array products in the fixed bed showed a distribution along the axis direction. The CNT arrays obtained at the top of the fixed bed were of good alignment and small diameter; while for the products obtained at the bottom of the reactor, CNT array blocks with higher densities, larger diameter, shorter length, and more defects, were formed. When CNT arrays were grown in a fluidized bed, they were of homogeneous structure, low densities, small uniform diameter, and had little defects, which can be attributed to available space, uniform temperature and reactant distribution in the fluidized bed reactor. These favored the mass production of CNT arrays with uniform properties in a fluidized bed reactor.

Synthesis of vertically aligned CNTs with hollow channel on Al 2O3-Al substrate electroplated with Fe nanoparticles

Synthesis of Vertically-Aligned Cnt Arrays from Diameter-Controlled Fe3o4 Nanoparticles

J2240204 Evaluation of the Properties and Alignment of Carbon Nanotube Sheet Grown by CVD Method

Vertically aligned carbon nanotubes grown from Langmuir–Blodgett films with nano alloy particles

Direct Growth of Horizontally Aligned Carbon Nanotubes Between Electrodes and Its Application to Field-Effect Transistors

Vertically aligned carbon nanotube arrays grown on a lamellar catalyst by fluidized bed catalytic chemical vapor deposition

Template synthesis, characterization and magnetic property of Fe nanowires-filled amorphous carbon nanotubes array

Synthesis of Vertically Aligned Carbon Nanotube Arrays on Silicon Substrates

Comparison of Vertically Aligned Carbon Nanotube Array Intercalated Production among Vermiculites in Fixed and Fluidized Bed Reactors

Macroscopic Three-Dimensional Arrays of Fe Nanoparticles Supported in Aligned Carbon Nanotubes

Mass Production of Aligned Carbon Nanotube Arrays by Fluidized Bed Catalytic Chemical Vapor Deposition

Layered Growth of Aligned Carbon Nanotubes Arrays on Silicon Wafers

Synthesis of CoFe2O4 nanotube arrays through an improved sol–gel template approach

Fabrication of Single-Walled Carbon-Nanotube with Metallic Electrodes

Carbon dioxide-boosted growth of high-density and vertically aligned carbon nanotube arrays on a stainless steel mesh

Formation mechanism of individual alumina nanotubes wrapping metal (Cu and Fe) nanowires

A Horizontally Aligned One-Dimensional Carbon Nanotube Array on a Si Substrate

Direct Growth of Three-Dimensional Multicomponent Micropatterns of Vertically Aligned Single-Walled Carbon Nanotubes Interposed with Their Multi-Walled Counterparts on Al-Activated Iron Substrates

Atomic Layer Deposition of Inorganic Films for the Synthesis of Vertically Aligned Carbon Nanotube Arrays and Their Hybrids

Multi-Directional Growth of Aligned Carbon Nanotubes Over Catalyst Film Prepared by Atomic Layer Deposition

Fabrication and characterization of vertically aligned carbon nanotubes on silicon substrates using porous alumina nanotemplates.