Abstract:The mechanism for the formation of double-layer vertically aligned carbon nanotube arrays (VACNTs) through single-step CVD growth is investigated. The evolution of the structures and defect concentration of the VACNTs are tracked by scanning electron microscopy (SEM) and Raman spectroscopy. During the growth, the catalyst particles are stayed constantly on the substrate. The precipitation of the second CNT layer happens at around 30 min as proved by SEM. During the growth of the first layer, catalyst nanoparticles are deactivated with the accumulation of amorphous carbon coatings on their surfaces, which leads to the termination of the growth of the first layer CNTs. Then, the catalyst particles are reactivated by the hydrogen in the gas flow, leading to the precipitation of the second CNT layer. The growth of the second CNT layer lifts the amorphous carbon coatings on catalyst particles and substrates. The release of mechanical energy by CNTs provides big enough energy to lift up amorphous carbon flakes on catalyst particles and substrates which finally stay at the interfaces of the two layers simulated by finite element analysis. This study sheds light on the termination mechanism of CNTs during CVD process.Graphical AbstractThe mechanism for the formation of double-layer vertically aligned carbon nanotube arrays (VACNTs) through single-step CVD growth was investigated. The growth of the second CNT layer lifts the amorphous carbon coatings on catalyst particles and substrates.

Chemical Vapor Deposition of Vertically Aligned Carbon Nanotube Arrays: Critical Effects of Oxide Buffer Layers

Investigation on the Formation Mechanism of Double-Layer Vertically Aligned Carbon Nanotube Arrays via Single-Step Chemical Vapour Deposition

Alcohol-Assisted Rapid Growth of Vertically Aligned Carbon Nanotube Arrays

Synthesis of Vertically-Aligned Cnt Arrays from Diameter-Controlled Fe3o4 Nanoparticles

Quality Control of Vertically Aligned Carbon Nanotubes Grown by Chemical Vapor Deposition

Carbon dioxide-boosted growth of high-density and vertically aligned carbon nanotube arrays on a stainless steel mesh

J2240204 Evaluation of the Properties and Alignment of Carbon Nanotube Sheet Grown by CVD Method

Selective Synthesis of 3D Aligned VO2 and V2O5 Carbon Nanotube Hybrid Materials by Chemical Vapor Deposition

Growth Process Conditions of Vertically Aligned Carbon Nanotubes Using Plasma Enhanced Chemical Vapor Deposition

Air and O2-Assisted Catalytic VACNT Growth Optimization for Uniformity and Throughput

Growth of Super Long Vertically Aligned Carbon Nanotube Arrays from Cyclohexane Via Floating Catalyst Method

Facile Synthesis of High Density Carbon Nanotube Array by a Deposition-Growth-densification Process

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

Mass Production of Aligned Carbon Nanotube Arrays by Fluidized Bed Catalytic Chemical Vapor Deposition

Atomic Layer Deposition of Inorganic Films for the Synthesis of Vertically Aligned Carbon Nanotube Arrays and Their Hybrids

Rational Control on Floating Catalysts for the Growth of Carbon Nanotube Assemblies: from Vertically Aligned Carbon Nanotube Arrays to Carbon Nanotube Films

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

Uniform Patterned Synthesis of Vertically-Aligned Carbon Nanotubes on Low-Stress Micromechanical Structures

Growth Mechanism and Kinetics of Vertically Aligned Carbon Nanotube Arrays

Vertically aligned carbon nanotube arrays grown on a lamellar catalyst by fluidized bed catalytic chemical vapor deposition