Abstract:Introduction Creating three-dimensional patterned nanoarchitectures on the surface of a substrate is an essential step towards the investigations on their novel properties and the developments of nanomaterials and nanodevices at different length scales. Patterned nano-architectures composed of one-dimensional (1D) nanowires/nanotubes on two-dimensional substrates always exhibit tailored mechanical, thermal, catalytic or optical properties. Among various 1D nanomaterials, carbon nanotube (CNT) is one of most attractive building blocks because of their unique properties originating from the small size, cylindrical structure, and high aspect ratio. If CNTs can be controllably patterned into 3D nanoarchitectures, they will hold promise for a variety of applications in intelligent nanocomposites with hydrophobic surfaces, field emission display, energy conversion and storage, sensor, and catalysis. The construction of patterned CNT architectures generally relies on the fabrication of patterned catalyst layers or substrates through complicated procedures. Shadow mask, block copolymer micellar films, soft-lithography, and photolithography, were used to pattern iron catalysts for the self oriented growth of CNT architectures [1]. Recently, numerous works on CNT growth with multi-composition catalysts were reported [2], and it was noticed that the growth of CNTs were sensitive to the catalyst composition. Herein, we proposed the gas-phase transfer process of a second phase metallic composition to modulate the activities and controllably construct the CNT architectures. The appearance of small amount additives may great change the activities of catalyst for CNT growth by over an order of magnitude. As shown in Fig.1. During the annealing process, the compositions on the covering mask were sublimated onto the Fe catalyst layer, which tuned the catalytic activities for

Direct Growth of Three-Dimensional Multicomponent Micropatterns of Vertically Aligned Single-Walled Carbon Nanotubes Interposed with Their Multi-Walled Counterparts on Al-Activated Iron Substrates

Multilevel, Multicomponent Microarchitectures of Vertically-Aligned Carbon Nanotubes for Diverse Applications

Uniform Patterned Synthesis of Vertically-Aligned Carbon Nanotubes on Low-Stress Micromechanical Structures

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

Patterned Growth of Vertically Aligned Carbon Nanotubes on Pre-patterned Iron/Silica Substrates Prepared by Sol−Gel and Shadow Masking

The Controlled Pattern Growth of Aligned Carbon Nanotubes

Selective growth of semiconducting single-walled carbon nanotubes solely from carbon monoxide

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

Thin-Film Metal Catalyst For The Production Of Multi-Wall And Single-Wall Carbon Nanotubes

Direct Growth of Horizontally Aligned Carbon Nanotubes Between Electrodes and Its Application to Field-Effect Transistors

Lift-up Growth of Aligned Carbon Nanotube Patterns

PATTERNED GROWTH OF SINGLE-WALLED CARBON NANOTUBES ON SILICON WAFER FOR ELECTRONIC DEVICES BY CHEMICAL VAPOR DEPOSITION PROCESS

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Selective Growth of Carbon Nanotube on Silicon Substrates

Patterning and growth of carbon nanotubes on a highly structured 3D substrate surface

Wafer Scale Synthesis of Dense Aligned Arrays of Single-Walled Carbon Nanotubes

Lithography-free synthesis of periodic, vertically-aligned, multi-walled carbon nanotube arrays

Multicomponent and Multidimensional Carbon Nanotube Micropatterns by Dry Contact Transfer.

Growth of Aligned Carbon Nanotubes on Different Metal Substrates

Patterning of three-dimensional carbon nanotube architectures by a composition transfer approach

Layered Growth of Aligned Carbon Nanotubes Arrays on Silicon Wafers