Abstract:Introduction Creating three-dimensional patterned nanoarchitectures on the surface of a substrate is an essential step towards the investigations on their novel properties and the developments of nanomaterials and nanodevices at different length scales. Patterned nano-architectures composed of one-dimensional (1D) nanowires/nanotubes on two-dimensional substrates always exhibit tailored mechanical, thermal, catalytic or optical properties. Among various 1D nanomaterials, carbon nanotube (CNT) is one of most attractive building blocks because of their unique properties originating from the small size, cylindrical structure, and high aspect ratio. If CNTs can be controllably patterned into 3D nanoarchitectures, they will hold promise for a variety of applications in intelligent nanocomposites with hydrophobic surfaces, field emission display, energy conversion and storage, sensor, and catalysis. The construction of patterned CNT architectures generally relies on the fabrication of patterned catalyst layers or substrates through complicated procedures. Shadow mask, block copolymer micellar films, soft-lithography, and photolithography, were used to pattern iron catalysts for the self oriented growth of CNT architectures [1]. Recently, numerous works on CNT growth with multi-composition catalysts were reported [2], and it was noticed that the growth of CNTs were sensitive to the catalyst composition. Herein, we proposed the gas-phase transfer process of a second phase metallic composition to modulate the activities and controllably construct the CNT architectures. The appearance of small amount additives may great change the activities of catalyst for CNT growth by over an order of magnitude. As shown in Fig.1. During the annealing process, the compositions on the covering mask were sublimated onto the Fe catalyst layer, which tuned the catalytic activities for

Patterning and growth of carbon nanotubes on a highly structured 3D substrate surface

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

Controlled Growth, Patterning and Placement of Carbon Nanotube Thin Films

Fast and Controlled Integration of Carbon Nanotubes into Microstructures

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

Patterning of three-dimensional carbon nanotube architectures by a composition transfer approach

Uniform Patterned Synthesis of Vertically-Aligned Carbon Nanotubes on Low-Stress Micromechanical Structures

Patterned Deposition of Multi-Walled Carbon Nanotubes on Self-Assembled Monolayers

Patterned carbon nanotubes fabricated by the combination of microcontact printing and diblock copolymer micelles.

Lift-up Growth of Aligned Carbon Nanotube Patterns

Controlled growth of single-walled carbon nanotubes on patterned substrates

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Selective Growth of Carbon Nanotube on Silicon Substrates

An Etching-Free Method for Patterning Carbon Nanotube Films Enabled by Universal Wettability Modulation

Patterned Growth of Well-aligned Carbon Nanotube Arrays on Quartz Substrates by Chemical Vapor Deposition

Nanoimprint Lithography for Next-Generation Carbon Nanotube-Based Devices

Explorations on growth mechanism, controlled synthesis and applications of carbon nanotubes

Multilevel, Multicomponent Microarchitectures of Vertically-Aligned Carbon Nanotubes for Diverse Applications

Surface-induced patterns from evaporating droplets of aqueous carbon nanotube dispersions

Controllable patterning and CVD growth of isolated carbon nanotubes with direct parallel writing of catalyst using Dip Pen Nanolithography

Aligned Single-Walled Carbon Nanotube Patterns with Nanoscale Width, Micron-Scale Length and Controllable Pitch