Abstract:Template-based electrochemical synthesis has widely been used to produce metal nanowires and nanorods. Commercially available filtration membranes, such as anodic aluminum oxide (AAO) and polycarbonate track etch membranes, have commonly been utilized as hard templates for this purpose. In this process, a thick metal film is usually sputtered or vacuum evaporated onto one side of the membrane to block the pores and serve as the working electrode for the subsequent electrodeposition. Here, we show that during the deposition of the metal electrode for AAO membranes, the electrode metal diffuses into the pores and is deposited on the pore walls which leads to preferential electrodeposition of metal on the walls and therefore forms metal tubes. This phenomenon has been utilized to fabricate short nanotubes by carefully controlling the electrodeposition conditions. The process is a straightforward method for any electroplatable materials to form nanoscale tubular structures. The effects of working electrodes and electrodeposition conditions on the formation of tubular structures are discussed in detail. A new mechanism based on this simple fact is proposed to explain the formation of Ni tubes by Ni-Cu co-deposition. Also, we demonstrate how to distinguish magnetic nanotubes from nanorods by a simple magnetic measurement.

Fabrication of Single-Walled Carbon-Nanotube with Metallic Electrodes

Investigation of the Fabrication and Structure of Double-Wall Carbon Nanotubes

Development of Microsturcture Based on Single-Wall Carbon Nanotube.

Microfabrication Of Single-Wall Carbon Nanotube One-Dimensional Unit

A New Method to Fabricate Large Amount of Single-Walled Carbon Nanotubes

Self-aligned Split Gate Electrodes Fabricated on Suspended Carbon Nanotubes

Fabrication of the Carbon Nanotubes with Small Pits or Embedded by Nanoparticles Via Template-Assisted Method

The fabrication of short metallic nanotubes by templated electrodeposition

Suspended Multiwalled Carbon Nanotubes As Self-Aligned Evaporation Masks.

Fabrication of Aligned Carbon Nanotubes by a Vapor-phase Deposition Technique and Their Field Emission Properties

The fabrication of nanoelectrodes based on a single carbon nanotube.

Self-aligned Electrodes for Suspended Carbon Nanotube Structures

Using Nanoscale Thermocapillary Flows to Create Arrays of Purely Semiconducting Single-Walled Carbon Nanotubes

Selective Fabrication of Quasi-Parallel Single-Walled Carbon Nanotubes on Silicon Substrates

Carbon Nanotubes Synthesized by Simple Thermal Chemical Vapor Deposition and Their Electrical Properties

Fabrication and Electrochemical Properties of Free-Standing Single-Walled Carbon Nanotube Film Electrodes

Formation mechanism of individual alumina nanotubes wrapping metal (Cu and Fe) nanowires

Fabrication of Nitrogen-doped Multi-walled Carbon Nanotube and Their Field Effect Transistor Properties

Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections

Self-Aligned Growth of Single-Walled Carbon Nanotube Bridging Two Electrodes

Fabrication and characterization of vertically aligned carbon nanotubes on silicon substrates using porous alumina nanotemplates.