Abstract:The fabrication of carbon nanotube (CNT) structures, including simple tube–tube connections, crossed junctions, T‐junctions, zigzag structures, and even nanotube networks, has been achieved by cutting and soldering CNTs using electron‐beam‐induced deposition of amorphous carbon (a‐C), as detailed in the work of Peng and co‐workers on p. 1825. These CNT structures have been constructed with a high degree of control, and it is found that the electric conductance and mechanical strength of the junctions can be improved by the deposition of a‐C and by increasing the contact area of the junctions. Individual carbon nanotubes (CNTs) have been cut, manipulated, and soldered via electron‐beam‐induced deposition of amorphous carbon (a‐C) and using a scanning tunneling microscope inside a transmission electron microscope. All CNT structures, including simple tube–tube connections, crossed junctions, T‐junctions, zigzag structures, and even nanotube networks, have been successfully constructed with a high degree of control, and their electrical and mechanical properties have been measured in situ inside the transmission electron microscope. It is found that multiple CNTs may be readily soldered together with moderate junction resistance and excellent mechanical resilience and strength, and the junction resistance may be further reduced by current‐induced graphitization of the deposited a‐C on the junction.

Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections

Cover Picture: Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections (adv. Funct. Mater. 11/2005)

Modeling of carbon nanotube (CNT) interconnects

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Plumbing carbon nanotubes

Circuit Modeling and Performance Analysis of Multi-Walled Carbon Nanotube Interconnects

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Fabrication of Multiwalled Carbon Nanotube Bridges by Poly-Methylmethacrylate Suspended Dispersion

Fabricating Carbon Nanotube Fiber Joints by Meniscus-Confined Electrochemical Deposition Method

Fabrication of Carbon Nanotube Interconnections by Current-Assisted Laser Irradiation

Conical Carbon Fibers with Carbon Nanotubes As Their Cores: Fabrication, Characterization and Field Emission

Fabrication of highly conductive carbon nanotube fibers for electrical application

Shaping Carbon Nanotubes and the Effects on Their Electrical and Mechanical Properties

Compliant Carbon Nanotube-Metal Contact Structures

Carbon Nanotube As the Core of Conical Carbon Fiber: Fabrication, Characterization and Field Emission Property

Mechanical Strength Improvements of Carbon Nanotube Threads through Epoxy Cross-Linking

Investigation on Junction Contacts of Semiconducting Carbon Nanotube Networks Using Conductive Atomic Force Microscopy

Electrical tomography using atomic force microscopy and its application towards carbon nanotube-based interconnects

Fabrication and Characterization of Carbon Nanotubes As R.F. Interconnects

In situ measurements on individual thin carbon nanotubes using nanomanipulators inside a scanning electron microscope

Fabrication and electrical characterization of multiwalled carbon nanotube-based circuit at room temperature