Fabrication of ultra-sharp ZnO nanotip from sub-micro ZnO whiskers by electric field treatment

Juncong She,Zhiming Xiao,Shaozhi Deng,Jun Chen,Yuhua Yang,Guowei Yang,Ning Xu

DOI: https://doi.org/10.1109/IVNC.2007.4480957

2007-01-01

Abstract:In this work, we particularly demonstrate that ZnO nanotips can be formed from a sub-micro ZnO whisker by field emission treatment. The underlying physics are discussed.

What problem does this paper attempt to address?

Fabrication of Ultra-Sharp ZnO Nanotip from Sub-Micro ZnO Whiskers by Electric Field Treatment

Juncong She,Zhiming Xiao,Shaozhi Deng,Jun Chen,Yang Yun,Guokun Yang,Ning Xu

DOI: https://doi.org/10.1109/ivnc.2007.4480957

2007-01-01

Abstract:In this work, we particularly demonstrate that ZnO nanotips can be formed from a sub-micro ZnO whisker by field emission treatment. The underlying physics are discussed.
Pulsed-laser Treatment for Lowering Resistance and Enhancing Field Emission of Solution-Grown ZnO Nanowires

She, J.C.,Xu, C.J.,He, H.,Xu, N.S.

DOI: https://doi.org/10.1109/ivnc.2009.5271636

2009-01-01

Abstract:One dimensional ZnO nanostructures prepared by low temperature solution-phase methods have been investigated for a number of potential applications. In these applications, they take an important function as charge transport path in the devices. Thus, the electrical conductivity, carrier mobility and ZnO-substrate junction are crucial for device performance. One comment way for this purpose is to dope ZnO NWs in synthesis process. However, it is found that doping can be difficult in aqueous systems. It is because the dopant species can easily form aquo ions and not be incorporated into the crystal lattice. Although alternative methods such as post-thermal-annealing can be employed, such a high temperature process is not compatible for most of the devices fabrication procedure. Therefore, it is necessary to develop new techniques for this purpose. Here, the authors report the investigation of effects of pulsed-laser treatment on the conductivity and field emission of ZnO NWs.
Fabrication of ZnO Nanowires by Vapor-Phase Deposition and Their Field Emission Properties

Zhang Qifeng,Rong Yi,Chen Xianxiang,Zhang Gengmin,Zhang Zhaoxiang,Xue Zengquan,Chen Changqi,Wu Jinlei

DOI: https://doi.org/10.3969/j.issn.1674-4926.2006.07.014

2006-01-01

Chinese Journal of Semiconductors

Abstract:Unoriented ZnO nanowires are fabricated either on the surface of silicon wafer or at the tip of needle-like tungsten by vapor-phase deposition.Both the plane field emission and tip field emission of ZnO nanowires are studied using a field emission microscope.The results show that for unoriented ZnO nanowire thin films,the electric field intensities corresponding to the turn-on voltage and threshold voltage of field emission are 4.7 and 7.6V/μm,which are much lower than those of aligned nanowire arrays.The enhancement of the field emission ability is attributed to the fact that the field-induced screening effect can be effectively avoided due to the widely spaced intervals that exist between the unoriented nanowires.The field emission of the tungsten tip also can be effectively improved by assembling ZnO nanowires on the tip,which presents a potential application of ZnO nanowire on the probe of electron microscopes with ultrahigh resolution.
Zno Nanowire Field Electron Emitters

Juncong She,Tao Cao,Shaozhi Deng,Jun Chen,Ningsheng Xu

DOI: https://doi.org/10.1109/ivnc.2015.7225564

2015-01-01

Abstract:This talk gives an overview on the precisely-controlled fabrication, optimization of the field electron emission performance, and the potential application of the zinc oxide nanoemitter arrays. The related nanofabrication methods, material and device physics are discussed.
Fabrication and Characterization of Gated ZnO Nanowire Field Electron Emitters

Laitang Luo,Juncong She,Shaozhi Deng,Jun Chen,Ningsheng Xu

DOI: https://doi.org/10.1109/ivnc.2016.7551526

2016-01-01

Abstract:Nanofabrication procedure was developed to obtain uniform zinc oxide (ZnO) nanowire arrays. The geometric uniformity of the nanowire and the surface smoothness were improved by optimizing the fabrication processes. Array of gated ZnO nano-emitter was fabricated to realize the low driving voltage triode structure.
Fabrication of ZnO Nanowire Field Emitter Arrays with Self-Aligned Focus Electrode Structure

Yuanming Liu,Long Zhao,Zhipeng Zhang,Daokun Chen,Guofu Zhang,Juncong She,Shaozhi Deng,Ningsheng Xu,Jun Chen

DOI: https://doi.org/10.1109/ivnc.2016.7551525

2016-01-01

Abstract:ZnO nanowire field emitter arrays with self-aligned focus electrode were designed. The simulation of the electron trajectory verified the focusing characteristics of designed structure. The ZnO nanowire field emitter arrays were successfully fabricated and the addressing operation was realized.
Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

J HUANG,S LIU,Y WANG,Z YE

DOI: https://doi.org/10.1016/j.apsusc.2008.03.150

IF: 6.7

2008-01-01

Applied Surface Science

Abstract:We have demonstrated the crystalline ZnO–Al2O3 core–shell nanowire structure by atomic layer deposition (ALD) at a temperature 100°C. The core–shell structure could have potential applications in the fabrication of ZnO field effect transistor. After dissolving the ZnO core, shape defined, rigid and robust crystalline Al2O3 shelled nanostructures have been fabricated. Nanowire ZnO nanostructures have been replicated by alumina shell. This is one of the most effective techniques for producing core–shell or shell/hollowed nanostructures of any desired objects. The Al2O3 shelled nanostructures could have potential applications as space confined nanoreactors, drug delivery, nanofluidic channels and optical transmitting.
Field electron emission from ultra-high density Si nanotip arrays

kang zhao,Juncong She,jing zhou,Shaozhi Deng,Jun Chen,Ningsheng Xu

DOI: https://doi.org/10.1109/ivnc.2004.1355012

2004-01-01

Abstract:Earlier, welldeveloped techniques of reactive ion etching (insotropic) and wet chemical etching (anisotropic) in combination with oxidation sharpening were used for the fabrication of nanotip arrays for field electron emission applications. The fabrications require lithography technique to form masks for the following etching, and normally high temperature oxidation sharpening process is needed. In the present paper, we report a non-lithography and non-oxidation-sharpening method for ultra-high .&nsity Si nanotip arrays fabrication. In addition, novel processes were developed to obtain Si nanotip array with different coating materials on apex, i.e., Sic and amorphous Si (a-Si). Comparative studies were carried out on the field electron emission properties of the Si nanotip arrays with different coated layers.
A General Approach for Fabricating Arc‐Shaped Composite Nanowire Arrays by Pulsed Laser Deposition

Yue Shen,Jung-Il Hong,Sheng Xu,Shisheng Lin,Hao Fang,Su Zhang,Yong Ding,Robert L. Snyder,Zhong Lin Wang

DOI: https://doi.org/10.1002/adfm.200901546

IF: 19

2010-01-01

Advanced Functional Materials

Abstract:Here, a new method is demonstrated that uses sideways pulsed laser deposition to deliberately bend nanowires into a desired shape after growth and fabricate arc‐shaped composite nanowire arrays of a wide range of nanomaterials. The starting nanowires can be ZnO, but the materials to be deposited can be metallic, semiconductor, or ceramic depending on the application. This method provides a general approach for rational fabrication of a wide range of side‐by‐side or “core–shell” nanowire arrays with controllable degree of bending and internal strain. Considering the ZnO is a piezoelectric and semiconductive material, its electrical properties change when deformed. This technique has potential applications in tunable electronics, optoelectronics, and piezotronics.
A General Approach For Fabricating Arc-Shaped Composite Nanowire Arrays By Pulsed Laser Deposition

Yue Shen,Jung-Il Hong,Sheng Xu,Shisheng Lin,Hao Fang,Su Zhang,Yong Ding,Robert L. Snyder,Zhong Lin Wang

DOI: https://doi.org/10.1002/adfm.200901546

IF: 19

2010-01-01

Advanced Functional Materials

Abstract:Here, a new method is demonstrated that uses sideways pulsed laser deposition to deliberately nanowires into a desired shape after growth and fabricate are shaped composite nanowire arrays of a wide range of nanomaterials. The starting nanowires can be ZnO, but the materials to be deposited can be metallic semiconductor, or ceramic depending on the application. This method provides a general approach for rational fabrication of a wide range of side be sire or "core-shell" nanowire arrays with controllable degree of bending and internal strain. Considering the ZnO is a piezoelectric and semiconductive materials, its electric properties change when deformed. Thus technique has potential applications in tunable electronics, optoelectronics, and piezotronics.
Fabrication of ZnO Nanowire Field-Emitter Arrays with Focusing Capability

Yuanming Liu,Long Zhao,Zhipeng Zhang,Daokun Chen,Guofu Zhang,Juncong She,Shaozhi Deng,Ningsheng Xu,Jun Chen

DOI: https://doi.org/10.1109/ted.2018.2817290

IF: 3.1

2018-01-01

IEEE Transactions on Electron Devices

Abstract:ZnO nanowire field-emitter arrays (FEAs) show great application potentials in large-area vacuum microelectronics devices. However, the electron divergence is an issue which should be addressed. In this paper, ZnO nanowire FEAs with co-planar focus electrode were designed. A four-mask fabrication process and lift-off process were adopted to achieve the integration of focus electrode. The device demonstrated line-addressing and focusing capability with a spacing of 5 mm between anode and cathode, and the linewidth of field-emission images was reduced from 2.25 to 1.35 mm when the focus voltage changed from 50 to -50 V. Besides, line-shaped emission patterns were observed during focusing process, which was attributed to the emission pattern from the ZnO nanowire and the asymmetrical focusing electrical field.
Fabrication of ZnO nanowire field emitter arrays with non-coplanar focus electrode structure

Yuanming Liu,Long Zhao,Zhipeng Zhang,Keshuang Zheng,Daokun Chen,Guofu Zhang,Juncong She,Shaozhi Deng,Ningsheng Xu,Jun Chen

DOI: https://doi.org/10.1109/IVNC.2017.8051535

2017-01-01

Abstract:ZnO nanowire field emitter arrays with non-coplanar focus electrode structure was designed. A simulation was conducted to verified the focusing ability of the focus electrode structure. The designed structure was realized successfully and the growth condition of ZnO nanowires in the structure was studied.
Field Emission Microscopy Study of Zinc Oxide Nanowires on Tungsten Tip

Xianxiang Zhang,Gengmin Zhang,Xin Bai,Xingyu Zhao,Jing Xiao,Yue Wu,Fengyuan Lu,Dengzhu Guo

DOI: https://doi.org/10.1116/1.3079650

2009-01-01

Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena

Abstract:This article focuses on the field emission from a small number of zinc oxide (ZnO) nanowires. ZnO nanowires were grown directly on W tips and their field emission was studied in a traditional field emission microscope (FEM). The FEM pattern of a single ZnO nanowire was ring shaped, indicating that most of the emission from the (0001) facets of the ZnO nanowires came from their circumferences. Scanning electron microscopy observation, measurement of dependence of the emission current on the applied cathode voltage (I-V behavior), and acquirement of FEM patterns were performed before and after heat treatment of the samples, respectively. The heat treatment was found to play either a favorable or an unfavorable role. It could lead to a stable emission or damage of the emitters, depending on the heating conditions.
Tip-Morphology-Dependent Field Emission from Zno Nanorod Arrays

Nan Pan,Haizhou Xue,Minghui Yu,Xuefeng Cui,Xiaoping Wang,J. G. Hou,Jianxing Huang,S. Z. Deng

DOI: https://doi.org/10.1088/0957-4484/21/22/225707

IF: 3.5

2010-01-01

Nanotechnology

Abstract:Vertically well-aligned ZnO nanorod arrays with three kinds of tip morphology-abruptly sharpened, tapered and plane-have been controllably fabricated with wafer size uniformity by vapor phase transport and condensation. Except that the tip morphology is distinctly different, all of these nanorods are single crystalline, growing along their wurtzite < 0001 > axis, with similar diameters, lengths and densities. The field emission properties of these nanorod arrays are comparatively investigated and are found to be strongly affected by the tip morphology. A nanorod with the abruptly sharpened tip possesses the lowest turn-on and threshold electric fields as well as the highest field enhancement factor. Further analysis reveals that the abruptly sharpened tip morphology can reduce the screening effect more efficiently than the others. These results are very helpful for the design, fabrication and optimization of integrated field emitters using 1D nanostructures as the cathode material.
Room-temperature fabrication of highly oriented ZnO nanoneedle arrays by anodization of zinc foil

Xufeng Wu,Gewu Lu,Chun Li,Gaoquan Shi

DOI: https://doi.org/10.1088/0957-4484/17/19/026

IF: 3.5

2006-01-01

Nanotechnology

Abstract:Highly oriented ZnO nanoneedle arrays were electrochemically prepared by anodization of zinc foil in a freshly prepared zincate saturated aqueous solution at room temperature. Typically, the needles have a length of 550-650 nm with a tip diameter of 10-15 nm and a root diameter of 50-60 nm, and grow along their [001] direction. The crystal structure of the ZnO nanoneedles was confirmed by scanning and transmission electron micrographs, x-ray diffraction patterns and photoluminescence spectra.
Fabrication Of Zno Nanowire Field Emitter Arrays For Field Emission Display Application

K. Huang,Y. L. Ke,G. F. Zhang,Jun Chen,S. Z. Deng,N. S. Xu

2011-01-01

Abstract:ZnO nanowire field emitter arrays were fabricated for field emission display application by combining a microfabrication and self-assembly processes. The ZnO nanowires were synthesized without catalyst by thermal oxidation of zinc thin film. In order to improve its performance and fabrication compatibility with device structure, the effects of oxidation temperature and film deposition method were studied. The characteristics of the ZnO nanowire field emitter arrays in a fully-sealed 3.5 inch field emission device will be presented.
Field Emission Tip Array Fabrication Utilizing Geometrical Hindrance in the Oxidation of Si

Ke Sun,Wei Zhang,Biyun Li,Jae Young Lee,Ya-Hong Xie,Thomas Schroeder,Jens Katzer,Xinyu Wei,Thomas P. Russell

DOI: https://doi.org/10.1109/tnano.2012.2208472

2012-01-01

IEEE Transactions on Nanotechnology

Abstract:Sharpness of field emitter tips is one of the key factors to achieve excellent field emission performance. In order to sharpen the tips to atomic scale, a new method combining the bottom-up process of wafer-scale nanopattern formation via self-assembly of diblock copolymer with the top-down process of anisotropic etching of Si followed by nanocasting is developed. Geometrical hindrance in the oxidation of Si at nanometer scale is exploited to further sharpen the field emission tips.
Preparation and Dielectric Properties of Nanostructured ZnO Whiskers

Shi Xiao-Ling,Yuan Jie,Zhou Wei,Rong Ji-Li,Cao Mao-Sheng

DOI: https://doi.org/10.1088/0256-307x/24/10/078

2007-01-01

Abstract:By a novel controlled combustion synthesis method, a large number of nanostructured ZnO whiskers with different morphologies, such as tetra-needles, long-leg tetra-needles and multi-needles, are prepared without any additive in open air at high temperature. The morphologies and crystalline structures of the as-prepared ZnO nanostructured whiskers are investigated by SEM and XRD. The possible growth mechanism on the nanostructured ZnO whiskers is proposed. The experimental results indicate that the dielectric constants and losses of the nanostructured ZnO whiskers are very low, demonstrating that the nanostructured ZnO whiskers are low-loss materials for microwave absorption in X-band. However, obvious microwave absorption in nanostructured ZnO whiskers is observed. The quasi-microantenna model may be attributed to the microwave absorption of the ZnO whiskers.
Enhanced Cold Field Emission of Large-area Arrays of Vertically Aligned ZnO-nanotapers Via Sharpening: Experiment and Theory

Zhuo Zhang,Guowen Meng,Qiang Wu,Zheng Hu,Jingkun Chen,Qiaoling Xu,Fei Zhou

DOI: https://doi.org/10.1038/srep04676

IF: 4.6

2014-01-01

Scientific Reports

Abstract:Large-area arrays of vertically aligned ZnO-nanotapers with tailored taper angle and height are electrodeposited on planar Zn-plate via continuously tuning the Zn(NH3)4(NO3)2 concentration in the electrolyte. Experimental measurements reveal that the field-emission performance of the ZnO-nanotaper arrays is enhanced with the sharpness and height of the ZnO-nanotapers. Theoretically, the ZnO-nanotaper is simplified to a "charge disc" model, based on which the characteristic macroscopic field enhancement factor (γC) is quantified. The theoretically calculated γC values are in good agreement with the experimental ones measured from arrays of ZnO-nanotapers with a series of geometrical parameters. The ZnO-nanotaper arrays have promising potentials in field-emission. The electrochemical synthetic strategy we developed may be extended to nanotaper arrays of other materials that are amenable to electrodeposition, and the "charge disc" model can be used for quasi-one-dimensional field emitters of other materials with nano-sized diameters.
Electric-field-assisted growth and alignment of ZnO nanowires in device fabrication

Zhao Liu,Rong Zhu,Guoping Zhang

DOI: https://doi.org/10.1088/0022-3727/43/15/155402

2010-01-01

Abstract:Single crystalline ZnO nanowires (NWs) were synthesized on a coplanar electrode pair on a silicon substrate using an electric-field-assisted wet chemical method. The results reveal that the growth position and alignment of the NWs are significantly affected by the applied electric field. Under a direct current electric field, the NWs predominantly grow on cathodes, while the NWs under an alternating current electric field at megahertz grow symmetrically on both anode and cathode and are congregated and well oriented at the sites close to and between the opposite ends of the electrodes. The control method for the growth and alignment of NWs provides a promising approach for integrating nanomaterials into nanoelectromechanical devices.

Fabrication of ultra-sharp ZnO nanotip from sub-micro ZnO whiskers by electric field treatment

Fabrication of Ultra-Sharp ZnO Nanotip from Sub-Micro ZnO Whiskers by Electric Field Treatment

Pulsed-laser Treatment for Lowering Resistance and Enhancing Field Emission of Solution-Grown ZnO Nanowires

Fabrication of ZnO Nanowires by Vapor-Phase Deposition and Their Field Emission Properties

Zno Nanowire Field Electron Emitters

Fabrication and Characterization of Gated ZnO Nanowire Field Electron Emitters

Fabrication of ZnO Nanowire Field Emitter Arrays with Self-Aligned Focus Electrode Structure

Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

Field electron emission from ultra-high density Si nanotip arrays

A General Approach for Fabricating Arc‐Shaped Composite Nanowire Arrays by Pulsed Laser Deposition

A General Approach For Fabricating Arc-Shaped Composite Nanowire Arrays By Pulsed Laser Deposition

Fabrication of ZnO Nanowire Field-Emitter Arrays with Focusing Capability

Fabrication of ZnO nanowire field emitter arrays with non-coplanar focus electrode structure

Field Emission Microscopy Study of Zinc Oxide Nanowires on Tungsten Tip

Tip-Morphology-Dependent Field Emission from Zno Nanorod Arrays

Room-temperature fabrication of highly oriented ZnO nanoneedle arrays by anodization of zinc foil

Fabrication Of Zno Nanowire Field Emitter Arrays For Field Emission Display Application

Field Emission Tip Array Fabrication Utilizing Geometrical Hindrance in the Oxidation of Si

Preparation and Dielectric Properties of Nanostructured ZnO Whiskers

Enhanced Cold Field Emission of Large-area Arrays of Vertically Aligned ZnO-nanotapers Via Sharpening: Experiment and Theory

Electric-field-assisted growth and alignment of ZnO nanowires in device fabrication