Abstract:Abstract In order to solve the problem that a traditional articulated arm coordinate measuring machine (AACMM) cannot measure automatically, a self-driven AACMM is proposed. Based on the self-driven AACMM design indicators, the length of the connecting rods of the self-driven AACMM was allocated. The self-driven AACMM virtual prototype was designed and assembled based on joint module selection and joint component design, and its measurement space range was also verified. The key components of the structural optimized design and dynamic performance analysis of motion parameters are adopted, respectively, to correct the positioning error of the self-driven AACMM’s probe caused by static and dynamic deformations. The static deformation of the structure caused by the self-driven AACMM’s weight was analyzed. The influence of the dynamic flexible deformation on the positioning error of the probe of the self-driven AACMM during the variable-speed approach and the constant-speed touch measurement stage was studied. The results show that the measurement space range of the self-driven AACMM designed in this paper can meet the design index of the measuring radius. The probe position error caused by static deformation of the measuring machine after structural optimization is reduced by an order of magnitude, and the equivalent stress of the mechanical structure of the self-driven AACMM is within the allowable stress of the material. The positioning error of the probe caused by the dynamic deformation of the self-driven AACMM structure meets the positioning accuracy index. During the stage of self-driven AACMM constant-speed touch measurement, the instantaneous position error of the probe changes linearly with the touch time and the optimal touch speed (6.6 mm s −1 , 6.4 mm s −1 ) exists to minimize the probe positioning error. During the variable-speed approach stage, the influence of the angular acceleration and the angular velocity of each joint on the positioning error of the probe is negligible when the self-driven AACMM is in the typical posture. In the extreme posture, with the optimal joint angular acceleration ( 0.00055 ∘ s − 2 ) and angular velocity ( 0.0185 ∘ s − 1 ), the inertial force of the measuring machine structure and the instantaneous position error of the probe are the smallest, and the movement stability is the best. The structural optimization design and motion parameter performance analyses of the self-driven AACMM can provide a theoretical research foundation for subsequent motion parameter optimization and dynamic error compensation modeling.

Structure Design and Optimization of MEMS Micro Tactile Probe for NMM

A New Type of MEMS Accelerometer with Up-Tuning Structure

A Micro-wires Based Tactile Sensor for Prosthesis.

Optimization Of The Tip Of Microwave Afm Probe

Research On The Sensing Performance Of The Tuning Fork-Probe As A Micro Interaction Sensor

Topology optimization research and simulation analysis of high-performance MEMS pressure sensor

Scanning test platform based on MEMS micro tactile probe and nanomeasuring machine

Development of Elastic Diaphragm Structure for Ultra-low Stiffness Probe and Mechanical Properties Testing Method

Design and fabrication of a novel silicon probe for micromachined surface profilers

Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics

The Art of Electrochemical Etching for Preparing Tungsten Probes with Controllable Tip Profile and Characteristic Parameters

Design and Research of the Point-Contact Optothermal Microactuator

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Dimension Measurement Based on MEMS Micro Tactile Probe and Nanomeasuring Machine

Structural Design and Output Characteristic Analysis of Magnetostrictive Tactile Sensor for Robotic Applications

An Optical Probe Stage and Its Applications in Mechanical Behavior Measurements of Micro-Objects and Thin Films

Structural design and performance analysis of a self-driven articulated arm coordinate measuring machine

Development of a High-Precision Multifunctional Probe for Measuring Microstructures

Micro/nano Scale Mechanical Tests Based on the Probe Platform

Probe Experimental Mechanics

Design and Development of Novel Electroplating Spring Frame Mems Structure Specimens for the Microtensile Testing of Thin Film Materials