Abstract:Observing the gain and loss of PDMS and LiNbO3 surface molecules through an in situ monitoring strategy for oxygen plasma. Saturation of oxygen‐ion and ─OH on the surfaces is achieved, leading to the optimal modification effect. The formation of Si─O─Nb occurred between PDMS and LiNbO3. The PDMS‐ LiNbO3 microfluidic chip exhibited excellent performance, with the highest pressure exceeding 60 psi. Acoustic microfluidic chips, fabricated by combining lithium niobate (LiNbO3) with polydimethylsiloxane (PDMS), practically find applications in biomedicine. However, high‐strength direct bonding of LiNbO3 substrate with PDMS microchannel remains a challenge due to the large mismatching of thermal expansion coefficient at the interface and the lack of bonding theory. This paper elaborately reveals the bonding mechanisms of PDMS and LiNbO3, demonstrating an irreversible bonding method for PDMS‐LiNbO3 heterostructures using oxygen plasma modification. An in‐situ monitoring strategy by using resonant devices is proposed for oxygen plasma, including quartz crystal microbalance (QCM) covered with PDMS and surface acoustic wave (SAW) fabricated by LiNbO3. When oxygen plasma exposure occurs, surfaces are cleaned, oxygen ions are implanted, and hydroxyl groups (‐OH) are formed. Upon interfaces bonding, the interface will form niobium‐oxygen‐silicon covalent bonds to realize an irreversible connection. A champion bonding strength is obtained of 1.1 MPa, and the PDMS‐LiNbO3 acoustic microfluidic chip excels in leakage tests, withstanding pressures exceeding 60 psi, outperforming many previously reported devices. This work addresses the gap in PDMS‐LiNbO3 bonding theory and advances its practical application in the acoustic microfluidic field.

Transfer bonding of thick silicon Nitride film via split of porous silicon

Research on Silicon-Glass Thermal Bonding with SiO2 Film Assist

Epitaxial Growth and Transfer of Single Crystalline Si Thin Films on Double Layered Porous Silicon Substrate

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE-Si-Al-O-N (RE = Y or Yb) Glasses

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE–Si–Al–O–N (RE = Y or Yb) Glasses

Investigation of Silicon/Glass Anodic Bonding with Pecvd Silicon Carbide As the Intermediate Layer

Electromagnetic wave-transparent porous silicon nitride ceramic prepared by gel-casting combined with in-situ nitridation reaction

Formation of Silicon on Plasma Synthesized Aluminum Nitride Structure by Ion Cutting

Silicon-Silicon Anodic Bonding Process With Embedded Glass

A novel method of anodic bonding

Integration Technology for Wafer-Level LiNbO3 Single-Crystal Thin Film on Silicon by Polyimide Adhesive Bonding and Chemical Mechanical Polishing

Heterogeneous Bonding with Nanostructured Silver Langmuir-Blodgett Film

Single-crystalline LiNbO3 Integrated Onto Si-based Substrates Via Ar Plasma-Activated Low-Temperature Direct Bonding

Fabrication and characterization of 20 nm planar nanofluidic channels by glass-glass and glass-silicon bonding.

Formation of Silicon on Plasma Synthesized SiOxNy and Reaction Mechanism

Bonding Silicon Wafers with Reactive Multilayer Foils

Fabrication of Nanoporous Silicon Dioxide/silicon Nitride Membranes Using Etched Ion Track Technique

Fabrication of Thick Silicon Nitride Substrates by Tape Casting

Irreversible Bonding of Polydimethylsiloxane‐Lithium Niobate using Oxygen Plasma Modification for Surface Acoustic Wave based Microfluidic Application: Theory and Experiment

Enhanced photonics devices based on low temperature plasma-deposited dichlorosilane-based ultra-silicon-rich nitride (Si8N)

Study on the fiber/matrix interface modification of Si3N4 f/SiO2 composites with polymer derived double-layer coatings