Electromagnetic wave-transparent porous silicon nitride ceramic prepared by gel-casting combined with in-situ nitridation reaction

Conglin Zhang,Fang Ye,Laifei Cheng,Mingxing Li,Jie Zhou,Qing Zhang

DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.08.047

IF: 5.7

2021-12-01

Journal of the European Ceramic Society

Abstract:To achieve the balance between mechanical properties and electromagnetic wave-transparent properties of porous silicon nitride (Si3N4), the key is to form an interlocking microstructure constituted by columnar β-Si3N4 crystals. This structure can be realized by liquid-phase sintering. However, grain boundaries which affect high temperature properties and volume shrinkage during sintering are inevitable. We proposed a strategy to realize this structure by gel-casting of β-Si3N4 whisker (Si3N4w) and Si powder followed by in-situ nitridation of Si. To achieve chemically-stable slurry containing micro-sized Si with low viscosity, a novel formulation was developed. Two key structural parameters of the interlocking Si3N4w network, i.e., density of the Si3N4w skeleton and inter-whisker bonding mode, were adjusted by composition of raw materials and nitridation temperature. The flexural strength, dielectric constant and loss of the porous ceramics are 44.9 MPa, 2.7 and 2 × 10−3, when the volume fraction of Si3N4w/Si is 5 and the nitriding temperature is 1400 °C.

materials science, ceramics