Abstract:In the present work, a novel and facile process has been proposed to fabricate porous Si2N2O-Si3N4 multiphase ceramics with low dielectric constant (εr＜4.0). Since silica poly-hollow microspheres could serve as the source of SiO2 and the pore-forming agent, they have been introduced into Si3N4 slurry through the gelcasting technique. This process is benefited from the liquid phase sintering reaction between SiO2 and Si3N4 with the aid of sintering additives, leading to in-situ synthesis of Si2N2O phase and porous structure. The content of silica poly-hollow microspheres has great influence on the properties of the final products. It indicates that Si2N2O phase would become the major phase when the content of silica poly-hollow microspheres was above 25wt%. Furthermore, the micromorphology results reveal that the content of pores with many smaller aggregate microspheres increases as microspheres amount rises. As a result, along with the addition of silica poly-hollow microspheres, the bulk density decreases to 1.32±0.01g/cm3, and open porosity ranges from 28.4±0.4% to 52.0±0.5%. Porous Si2N2O-Si3N4 multiphase ceramics prepared with 25wt% silica poly-hollow microspheres addition possess flexural strength of 42.3±3.8MPa, low dielectric constant of 3.31 and loss tangent of 1.93×10−3. It turns out to be an effective method to fabricate porous Si2N2O-Si3N4 composites with excellent mechanical and dielectric properties, which could be applied to radome materials.

Cold spray and presureless sintering of zirconium phosphate bonded silicon nitride ceramics with porous gradient structure

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Microstructure, Mechanical and Dielectric Properties of Highly Porous Silicon Nitride Ceramics Produced by a New Water-Based Freeze Casting

Electromagnetic wave-transparent porous silicon nitride ceramic prepared by gel-casting combined with in-situ nitridation reaction

Preparation and Properties of Pressureless-Sintered Porous Si 3 N 4

Properties of porous Si3N4 ceramic electromagnetic wave transparent materials prepared by technique combining freeze drying and oxidation sintering

Porous Silicon Nitride Ceramics Prepared by Reduction-Nitridation of Silica

Fabrication of Porous Silicon Nitride Ceramics with Gradient Microstructure

High Performance Porous Wave-Transmitting Silicon Nitride Ceramics by Gel-Casting Technique

Effect of pre-oxidation on the microstructure, mechanical and dielectric properties of highly porous silicon nitride ceramics

POROUS Β-Sialon/si3n4 CERAMICS PREPARED BY REACTIVE SINTERING

Low-temperature preparation of porous SiC ceramics using phosphoric acid as a pore-forming agent and a binder

Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS)

Porous silicon nitride and SiAlON ceramics: Fabrication and characterization

Preparation And Properties Of High Strength Porous Si3n4 Ceramics

Pressureless Sintering and Properties Investigation of Silicon Nitride

Progress in Preparation and Properties of Porous Silicon Nitride Ceramics

Preparation, Properties and Growth Mechanism of Low-Cost Porous Si3N4 Ceramics with High Levels of β-Si3N4 Powders

In-situ Reaction Synthesis of Porous Si2N2O-Si3N4 Multiphase Ceramics with Low Dielectric Constant Via Silica Poly-Hollow Microspheres

Characterization of Porous Silicon Nitride/silicon Oxynitride Composite Ceramics Produced by Sol Infiltration

Fabrication of High-Porosity Silicon Nitride Ceramics with Excellent Mechanical Properties