Abstract:We have developed a manufacturing process for micromirrors based on microelectromechanical systems (MEMS) technology. The process involves designing an electrostatic vertically comb-driven actuator and utilizing a self-alignment process to produce a height difference between the movable comb structure and the fixed comb structure of the micromirror. To improve the stability of the micromirror, we propose four instability models in micromirror operation with the quasi-static driving principle and structure of the micromirror considered, which can provide a basic guarantee for the performance of vertical comb actuators. This analysis pinpoints factors leading to instability, including the left and right gap of the movable comb, the torsion beams of the micromirror, and the comb-to-beams distance. Ultimately, the voltages at which device failure occurs can be determined. We successfully fabricated a one-dimensional micromirror featuring a 0.8 mm mirror diameter and a 30 μm device layer thickness. The height difference between the movable and fixed comb structures was 10 μm. The micromirror was able to achieve a static mechanical angle of 2.25° with 60 V@DC. Stable operation was observed at voltages below 60 V, in close agreement with the theoretical calculations and simulations. At the driving voltage of 80 V, we observed the longitudinal displacement movement of the comb fingers. Furthermore, at a voltage of 129 V, comb adhesion occurred, resulting in device failure. This failure voltage corresponds to the lateral torsional failure voltage.

Hybrid Electrostatic Actuator for Micromirror Tilting

Into-plane Rotating Micromirror Actuated by a Hybrid Electrostatic Driving Structure

Micro Torsion Mirror Actuated by Compound Electrostatic Driving Structure

Torsion-mirror Actuators with Compound Electrostatic Driving Structures

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

A Novel Electrostatically Driven Micromirror with Lateral Comb Actuators and T-Shaped Torsion Bars

An Improved Electrostatically-Driven Micro Torsion Mirror Fabricated by Silicon Micromachining for Optical Switching Devices

Electromechanical Studies On Micro Torsion-Mirror Actuators With Monolithically Integrated Fiber Self-Holding Structures

Machining and functional testing of adaptive micro-mirror array

Design, Fabrication and Characterization of Novel Micromirror with Vertical Torsion Comb Driver

Novel MEMS Torsional Mirror Optical Switch

Design of Butterfly Plate Piezoelectric Actuator with Dual Driving Electrodes for MEMS Micro-Mirror

Driving Principle and Stability Analysis of Vertical Comb-Drive Actuator for Scanning Micromirrors

Design of an Electrostatic Silicon Torsion Micromirror for Low Drive Voltage and Wide Angle MEMS Optical Switch Applications

Design and investigation of dual-axis electrostatic driving MEMS scanning micromirror

MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique

Fabrication of the Open-Loop MEMS-Based Tilting Mirror Using the Compound Process

Novel method to improve stroke of electrostatically actuated MEMS micromirror

Electromechanical and Optical Properties of Torsion-Mirror Actuators for Optical Switching Applications

Tilting micromirror platform based on liquid dielectrophoresis

Design of Novel Sequential Engagement Vertical Comb Electrodes for Analog Micromirror