Abstract:Novel torsion-mirror actuators with monolithically integrated new fiber holding structures, which can feature self-fixing and self-aligning of optical fibers, are fabricated in regular silicon wafers as well as in SOI wafers by using the mixed micromachining based on the surface and bulk silicon microelectronics. The electromechanical performances of the actuators and the optical properties of their micro-mirrors are investigated experimentally and theoretically. The electrostatic yielding voltages for driving the micro-mirrors of the actuators to tilt from 0° to 90° spontaneously are in the range of 270–290V and the minimum holding voltages for keeping the tilting angle of the mirrors to be in 90° are found 55V or so when the thickness of the torsion-beams suspending the mirrors is about 1μm. Theoretical analysis manifests that the yielding voltage is most sensitive to the beam thickness among the series of design parameters about the torsion-mirror actuator structures. The micro-mirrors of the actuators can cyclically vibrate 108 times at least between 0° and 90°, and their shortest actuating time can reach an estimated less than 2ms. The surface roughness and its distribution of the micro-mirrors of the actuators are small and smooth, respectively, which is acceptable for wavelength division multiplexing applications basically.

Electromechanical and Optical Properties of Torsion-Mirror Actuators for Optical Switching Applications

Fabrication and characterization of torsion-mirror actuators for optical networking applications

Electromechanical Studies On Micro Torsion-Mirror Actuators With Monolithically Integrated Fiber Self-Holding Structures

Novel MEMS Torsional Mirror Optical Switch

Novel Optical Torsion-Mirror Components For Fiber Sensing Or Networking Applications

Fabrication and electromechanical characteristics of 2×2 torsion-mirror optical switch arrays with monolithically integrated fiber self-holding structures

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

An Improved Electrostatically-Driven Micro Torsion Mirror Fabricated by Silicon Micromachining for Optical Switching Devices

Torsion-mirror Actuators with Compound Electrostatic Driving Structures

Design of an Electrostatic Silicon Torsion Micromirror for Low Drive Voltage and Wide Angle MEMS Optical Switch Applications

Micro Torsion Mirror Actuated by Compound Electrostatic Driving Structure

Machining and functional testing of adaptive micro-mirror array

Design, Fabrication and Characterization of Novel Micromirror with Vertical Torsion Comb Driver

Multi-channel Optical Switching Based on Scanning Mirror Instrumentation

The Fabrication of 16*16 MEMS-Based Optical Switch with Accurate Optical Fiber Grooves Integration

Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application

Hybrid Electrostatic Actuator for Micromirror Tilting

A Novel Electrostatically Driven Micromirror with Lateral Comb Actuators and T-Shaped Torsion Bars

Optical-Electromechanical Performance of Mems Tilting Micro-Mirrors for Aon Communication System

Designing the Drive Scheme of the Silicon-Based Mems Torsion-Mirror Optical Switch

16×16 Mirror type optical switch with integrated fiber alignment and steady switching state