Abstract:Light Detection and Ranging (LiDAR) devices are critical for constructing three-dimensional scenes around vehicles, making them essential for automatic and intelligent driving systems. Micro-Electro-Mechanical Systems (MEMS) electromagnetic micromirrors have significantly developed MEMS-based LiDAR due to their inherent advantages. However, the traditional electromagnetic micromirrors, typically actuated by a single coil, experience crosstalk between the slow and fast axes. In this study, we introduce a dual-axis electromagnetic micromirror designed to eliminate this crosstalk. Unlike conventional micromirrors, our model features two distinct driving coils placed over the balance gimbal and reflecting mirror to control the slow and fast axes independently. This micromirror, with a 7.2 mm-diameter circular mirror, is manufactured using silicon on insulation (SOI) technology and incorporates a low-residual-stress packaging design. Our tests show that the scanning images from the fast axis of the proposed micromirror exhibit no crosstalk, achieving a significant improvement over traditional designs. Performance evaluation through geometric optical testing revealed that the slow axis resonates at 132 Hz and achieves a deflection angle of 36.3(degrees) with a quality factor of 26.9, while the fast axis resonates at 712 Hz, reaching 35.2(degrees) with a quality factor of 53.5. Additionally, the angle sensor performance was assessed, showing outputs that are highly proportional to the optical angles, recorded at 13.04 mV/deg and 9.80 mV/deg for the slow and fast axes, respectively.

Design of Novel Sequential Engagement Vertical Comb Electrodes for Analog Micromirror

A Novel Sequential Engagement Electrodes for Vertical Comb-Drive Actuator

An Electrostatic Vertical Comb-Drive Micromirror with Self-Aligned Assembly

MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique

Machining and functional testing of adaptive micro-mirror array

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Driving Principle and Stability Analysis of Vertical Comb-Drive Actuator for Scanning Micromirrors

Design and investigation of dual-axis electrostatic driving MEMS scanning micromirror

Hybrid Electrostatic Actuator for Micromirror Tilting

Process Platform For High Aspect-Ratio Self-Aligned Vertical Comb Actuators

A Poly-Si-Based Vertical Comb-Drive Two-Axis Gimbaled Scanner for Optical Applications

A Novel Electrostatically Driven Micromirror with Lateral Comb Actuators and T-Shaped Torsion Bars

Design, Fabrication and Characterization of Novel Micromirror with Vertical Torsion Comb Driver

Novel method to improve stroke of electrostatically actuated MEMS micromirror

The BELST II Process for a Silicon High-Aspect-ratio Micromaching Vertical Comb Actuator and Its Applications

Development of an Electrostatic Comb-Driven MEMS Scanning Mirror for Two-Dimensional Raster Scanning

A 2D MEMS Crosstalk-Free Electromagnetic Micromirror for LiDAR Application

Modeling and Optimization of a Novel ScAlN-Based MEMS Scanning Mirror with Large Static and Dynamic Two-Axis Tilting Angles

Realization of Three-Dimensionally MEMS Stacked Comb Structures for Microactuators Using Low-Temperature Multi-Wafer Bonding with Self-Alignment Techniques in CMOS-Compatible Processes

An FEM Study on Minimizing Electrostatic Cross-Talk in a Comb Drive Micro Mirror Array

A Study of Electronic Interface for Mems Variable Optical Attenuator (Voa)