Abstract:We have developed a manufacturing process for micromirrors based on microelectromechanical systems (MEMS) technology. The process involves designing an electrostatic vertically comb-driven actuator and utilizing a self-alignment process to produce a height difference between the movable comb structure and the fixed comb structure of the micromirror. To improve the stability of the micromirror, we propose four instability models in micromirror operation with the quasi-static driving principle and structure of the micromirror considered, which can provide a basic guarantee for the performance of vertical comb actuators. This analysis pinpoints factors leading to instability, including the left and right gap of the movable comb, the torsion beams of the micromirror, and the comb-to-beams distance. Ultimately, the voltages at which device failure occurs can be determined. We successfully fabricated a one-dimensional micromirror featuring a 0.8 mm mirror diameter and a 30 μm device layer thickness. The height difference between the movable and fixed comb structures was 10 μm. The micromirror was able to achieve a static mechanical angle of 2.25° with 60 V@DC. Stable operation was observed at voltages below 60 V, in close agreement with the theoretical calculations and simulations. At the driving voltage of 80 V, we observed the longitudinal displacement movement of the comb fingers. Furthermore, at a voltage of 129 V, comb adhesion occurred, resulting in device failure. This failure voltage corresponds to the lateral torsional failure voltage.

The BELST II Process for a Silicon High-Aspect-ratio Micromaching Vertical Comb Actuator and Its Applications

Process Platform For High Aspect-Ratio Self-Aligned Vertical Comb Actuators

A Boron Etch-Stop Assisted Lateral Silicon Etching Process for Improved High-Aspect-ratio Silicon Micromachining and Its Applications

<title>Toward the micromachined vibrating gyroscope using (111) silicon wafer process</title>

An Electrostatic Vertical Comb-Drive Micromirror with Self-Aligned Assembly

MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique

Realization of Three-Dimensionally MEMS Stacked Comb Structures for Microactuators Using Low-Temperature Multi-Wafer Bonding with Self-Alignment Techniques in CMOS-Compatible Processes

Design of Novel Sequential Engagement Vertical Comb Electrodes for Analog Micromirror

A Large Out-of-plane Motion Mechanism for Optical Applications

Driving Principle and Stability Analysis of Vertical Comb-Drive Actuator for Scanning Micromirrors

Large Stroke Staggered Vertical Comb-Drive Actuator for the Application of a Millimeter-Wave Tunable Phase Shifter

Fabrication of Micro Torsional Actuator Using Surface Plus Bulk Micromachining Processes

An electro-thermal SU-8 cantilever micro actuator based on bimorph effect

Hybrid Electrostatic Actuator for Micromirror Tilting

Design of a Large Displacement Thermal Actuator with a Cascaded V-beam Amplification for MEMS Safety-and-arming Devices

Serpentine elastic beam vertical comb actuator using silicon plastic deformation

A new fabrication method for enhancing the yield of linear micromirror arrays assisted by temporary anchors

A Novel Electrostatically Driven Micromirror with Lateral Comb Actuators and T-Shaped Torsion Bars

A Poly-Si-Based Vertical Comb-Drive Two-Axis Gimbaled Scanner for Optical Applications

Surface Micromachined Mirror Based on Pre-Stress Comb-Drive Actuator

Fabrication Process of Serf - Aligned Vertical Offset Comb Structure Using Plastic Deformation