Abstract:High-k HfOxNy and HfO2 have been applied to amorphous InGaZnO (a-IGZO) metal–oxide–semiconductor (MOS) capacitors as high-k gate dielectrics by using radio-frequency sputtering at room temperature. Effects of nitrogen incorporation on the optical band gap, band alignment and electrical properties of HfOxNy/IGZO/Si gate stacks have been systematically investigated by spectroscopic ellipsometry (SE), UV–vis spectroscopy, x-ray photoemission spectroscopy (XPS) and electrical measurements. Experimental results have confirmed the successful incorporation of nitrogen into HfO2 films and reduction in band gap with the incorporation of nitrogen for HfOxNy thin films. Reduction in valence band offset and increase in conduction band offset have been observed for HfOxNy/IGZO gate stack. Electrical properties measurements for a-IGZO MOS capacitors based on HfOxNy gate dielectrics have indicated that nitrogen incorporation leads to the improved interface quality, increased dielectric constant, reduced hysteresis voltage, and decreased leakage current density. Meanwhile, the leakage current mechanism under gate injection for MOS capacitors based on HfO2 and HfOxNy high-k gate dielectrics has been investigated systematically.

Silicon-on-glass fabrication process for out-of-plane comb capacitors

Silicon-On-Insulator Out-Of-Plane Electrostatic Actuator with in Situ Capacitive Position Sensing

Modification of Band Alignments and Optimization of Electrical Properties of Ingazno Mos Capacitors with High-K Hfoxny Gate Dielectrics

Design and Fabrication of A Torsional Z-Axis Capacitive Accelerometer with Novel Comb Capacitor

The Suppression Mechanism of Parasitic Capacitance for Comb Capacitor Fabricated with Silicon-On-Insulation

A silicon-on-glass Z-axis accelerometer with vertical sensing comb capacitors.

The BELST II Process for a Silicon High-Aspect-ratio Micromaching Vertical Comb Actuator and Its Applications

One-step fabrication and capacitive behavior of electrochemical double layer capacitor electrodes using vertically-oriented graphene directly grown on metal

An Electrostatic Vertical Comb-Drive Micromirror with Self-Aligned Assembly

Fabrication Process of Serf - Aligned Vertical Offset Comb Structure Using Plastic Deformation

Process Platform For High Aspect-Ratio Self-Aligned Vertical Comb Actuators

Serpentine elastic beam vertical comb actuator using silicon plastic deformation

A New Fabrication Procedure for Reproducibly Observing Leakage Current Reduction of SiO2 Due to Enhanced Phonon-Energy Coupling

Design and fabrication of uncooled MEMS capacitive FPA for IR imaging

The study on a voltage controlled capacitor with complex membrane

A Micromachined Silicon-on-Glass Accelerometer with an Optimized Comb Finger Gap Arrangement

MEMS based digital variable capacitors with a high-k dielectric insulator

MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique

Vertical Low-Voltage Oxide Transistors Gated by Microporous SiO2/LiCl Composite Solid Electrolyte with Enhanced Electric-Double-layer Capacitance

VO2 Phase-Transition-Based Vertical MEMS Microactuators

Decoupled Comb Capacitors for Microelectromechanical Tuning-Fork Gyroscopes