Abstract:In this paper, we present CMOS compatible fabrication of monocrystalline silicon micromirror arrays using membrane transfer bonding. To fabricate the micromirrors, a thin monocrystalline silicon device layer is transferred from a standard silicon-on-insulator (SOI) wafer to a target wafer (e.g., a CMOS wafer) using low-temperature adhesive wafer bonding. In this way, very flat, uniform and low-stress micromirror membranes made of monocrystalline silicon can be directly fabricated on top of CMOS circuits. The mirror fabrication does not contain any bond alignment between the wafers, thus, the mirror dimensions and alignment accuracies are only limited by the photolithographic steps. Micromirror arrays with 4 × 4 pixels and a pitch size of $16\ \mu{\rm m}\times 16\ \mu{\rm m}$ have been fabricated. The monocrystalline silicon micromirrors are 0.34 $\mu{\rm m}$ thick and have feature sizes as small as 0.6 $\mu{\rm m}$. The distance between the addressing electrodes and the mirror membranes is 0.8 $\mu{\rm m}$. Torsional micromirror arrays are used as spatial light modulators, and have potential applications in projection display systems, pattern generators for maskless lithography systems, optical spectroscopy, and optical communication systems. In principle, the membrane transfer bonding technique can be applied for integration of CMOS circuits with any type of transducer that consists of membranes and that benefits from the use of high temperature annealed or monocrystalline materials. These types of devices include thermal infrared detectors, RF-MEMS devices, tuneable vertical cavity surface emitting lasers (VCSEL) and other optical transducers.$\hfill{\hbox{[917]}}$

A new fabrication method for enhancing the yield of linear micromirror arrays assisted by temporary anchors

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Machining and functional testing of adaptive micro-mirror array

Single-wafer solution and optical phased array application of micro-mirror arrays with high fill factor and large sub-apertures

Fabrication of microlens arrays with well-controlled curvature by liquid trapping and electrohydrodynamic deformation in microholes.

Fabrication of High-Quality Microlens Arrays on Fused Silica Based on Combined Rapid Evaporative Ablation and Precision Melting Polishing of CO2 Lasers

A novel quasi-static MEMS piezoelectric micromirror array with a high fill factor and three degrees of freedom

Design and Fabrication Method of a Large-Size Electromagnetic MEMS Two-Dimensional Scanning Micromirror

A 19-Element Segmented MEMS Deformable Mirror Based on Electrostatic Repulsive-Force Actuator

Fabrication of Microlens Arrays Based on Spatial Light Modulator

Development of High-Fill-Factor Large-Aperture Micromirrors for Agile Optical Phased Arrays

Microlens Arrays: Fabrication of Microlens Arrays with Well-controlled Curvature by Liquid Trapping and Electrohydrodynamic Deformation in Microholes (adv. Mater. 23/2012)

Micromirror Array with Adjustable Reflection Characteristics Based on Different Microstructures and Its Application

Facile and Flexible Fabrication of Gapless Microlens Arrays Using A Femtosecond Laser Microfabrication and Replication Process

Electromagnetically Driven MEMS Micromirror with Torsion Beam Structure

Tunable Fabrication of Concave Microlens Arrays by Initiative Cooling-Based Water Droplet Condensation.

Arrays of monocrystalline silicon micromirrors fabricated using CMOS compatible transfer bonding

Using Micromachined Molds, Partial-curing PDMS Bonding Technique, and Multiple Casting to Create Hybrid Microfluidic Chip for Microlens Array

A Continuous-Membrane Micro Deformable Mirror Based on Anodic Bonding of SOI to Glass Wafer

Development of a novel micromirror based on surface micromaching technology

Fabrication of Large-Scale Microlens Arrays Based on Screen Printing for Integral Imaging 3d Display