Abstract:We demonstrate experimentally fabrication of optical elements with femtosecond pulses. The laser source we adopted is a low power Ti: sapphire laser oscillator, with a central wavelength of 790 nm and pulse duration of 100 fs. Positive-photoresist-film-coated glass substrate acts as the sacrificial material. Due to the extreme high intensity of the tightly focused femtosecond laser beam, nonlinear processing occurred between photoresist and the laser pulses, which enable the sub-micron feature processing. In the experiments, we use a translational stage that is controlled by a computer to accurately move for fabrication of optical elements with high precision. Various gratings and phase plates are fabricated by this method. The obtained gratings patterns are checked with a conventional optical microscopy. The fabricating widths and depths are measured with the Taylor Hobson equipment. With the same method, photomask for microelectronics can also be fabricated. From the experimental results, we see that a high processing precision and the feature size exceeding the diffraction limit can be achieved with this method. This technique can be applied to the fields of microoptics and microelectronics. The mechanism between femtosecond laser and photoresist is also investigated. The processing mechanics is considered as laser ablation and nonlinear two-photon absorption phenomenon. Fabrication of optical elements with femtosecond laser reflects a new trend for fabrication of microoptical elements.

A Monolithic Gimbal Micro-Mirror Fabricated and Remotely Tuned with a Femtosecond Laser

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Femtosecond Laser Nano-Fabrication With Extended Processing Range

Rapid Fabrication of Smooth Micro-Optical Components on Glass by Etching-Assisted Femtosecond Laser Modification

Micro-Fabrication By Femtosecond Laser Pulses

Fabrication of Embedded Microball Lens in PMMA with High Repetition Rate Femtosecond Fiber Laser.

Optical Nanofabrication of Concave Microlens Arrays

Dynamically Taming Focal Fields of Femtosecond Lasers for Fabricating Microstructures

Laser Nanofabrication: Applications in Micro-Optics, Micro-Electronics, Micromachines, and Microfluidics

Fabrication of Microoptical Elements with Femtosecond Laser

Scalable Shape-Controlled Fabrication of Curved Microstructures Using a Femtosecond Laser Wet-Etching Process

Free‐Form Micro‐Optics out of Crystals: Femtosecond Laser 3D Sculpturing

Fabrication of Optical Microlenses in Glass Using a Femtosecond Laser for LBA-on-a-Chip Applications

Manufacturing of Functional Polymer Micro- and Nano-Structures by Femtosecond Laser Pulse

Laser Micro-Fabrication/Manipulation of Dielectric Materials

Facile and Flexible Fabrication of Gapless Microlens Arrays Using A Femtosecond Laser Microfabrication and Replication Process

Varifocal-Piston Micromirror with Quasi-Simply Supported Piecewise Linear Flexure

Direct Fabrication of Microlens Arrays on PMMA with Laser-Induced Structural Modification

Microfabrication of Optical Elements with Femtosecond Ti: Sapphire Laser Oscillator