Abstract:Microlens arrays (MLAs) made from fused silica possess broad applications in wavefront sensing, optical focusing, beam shaping, etc. However, it is challenging to fabricate the hard-brittle silica MLAs with high accuracy and low cost by conventional manufacturing techniques efficiently. In this work, a novel two-step method, which consists of rapid evaporative ablation and precision melting polishing by CO2 lasers, is proposed to fabricate high-quality MLAs. The first step is to rapidly ablate and engrave micro-pillar arrays (MPAs) with flat groove bottom by high-energy density CO2 lasers. The second step is to precisely polish and shape the flat-topped MPAs into the dome-topped MLAs with good surface roughness (Sa) by low-energy density CO2 lasers. The whole preparation process could be achieved through a set of machining system. Firstly, the geometric dimension (period, p and height, h) of the microlens is determined by the Monte Carlo ray tracing method. Secondly, to diminish the groove depth inconsistency caused by heat accumulation, the multiple ablation compensation strategy is developed. The MPAs (p = 200-400 mu m), of which maximum height error is 7.1%, are prepared in 1 s by the proposed compensation strategy. Then, the MPAs are smoothed into the MLAs by lowenergy density CO2 lasers, and the average Sa is improved from 960 nm to 32.56 nm. Finally, the optical performances of the MLAs are verified from the effectiveness of imaging, focusing and homogenization. The proposed two-step processing method paves a new way to fabricate high-performance MLAs on hard-brittle fused silica with low cost and high efficiency.

Morphology adjustable microlens array fabricated by single spatially modulated femtosecond pulse

Rapid fabrication of quasi-periodic aspherical concave microlens array with different focal lengths on fused silica by shaping picosecond laser-induced multi-step wet-etching for multi-layer optical imaging

Fabrication of High-Quality Microlens Arrays on Fused Silica Based on Combined Rapid Evaporative Ablation and Precision Melting Polishing of CO2 Lasers

Micropatterning Microlens Arrays Fabricated by A Femtosecond Laser Wet Etch Process

A Simple Way to Fabricate Close-Packed High Numerical Aperture Microlens Arrays

Fabrication of Microlens Array with Controllable High NA and Tailored Optical Characteristics Using Confined Ink-Jetting

Microlens Arrays Enable Variable-Focus Imaging

Facile and Flexible Fabrication of Gapless Microlens Arrays Using A Femtosecond Laser Microfabrication and Replication Process

Rapid Fabrication of A Large-Area Close-Packed Quasi-Periodic Microlens Array on Bk7 Glass

Femtosecond Laser Fabrication of Submillimeter Microlens Arrays with Tunable Numerical Apertures

Fabrication of Large-Area Concave Microlens Array on Silicon by Femtosecond Laser Micromachining

Maskless Fabrication Of Concave Microlens Arrays On Silica Glasses By A Femtosecond-Laser-Enhanced Local Wet Etching Method

A Facile Method to Fabricate Close-Packed Concave Microlens Array on Cylindrical Glass

Controllable Preparation of Fused Silica Micro Lens Array through Femtosecond Laser Penetration-Induced Modification Assisted Wet Etching

Fabrication of multi-focal chalcogenide glass microlens arrays based on femtosecond laser-assisted chemical etching method

Fabrication of Concave Spherical Microlenses on Silicon by Femtosecond Laser Irradiation and Mixed Acid Etching.

Cost-efficient and Flexible Fabrication of Rectangular-Shaped Microlens Arrays with Controllable Aspect Ratio and Spherical Morphology

Soft Mold of Microlens Arrays Fabricated by Surface Self-Assembly

A Novel Fabricating Method of Micro Lens-on-Lens Arrays with Two Focal Lengths

Progress In Femtosecond Laser Fabrication Of Microlens Array With Spatial Light Modulators

Large-Scale High Quality Glass Microlens Arrays Fabricated by Laser Enhanced Wet Etching