Abstract:Cylindrical microlens arrays (CMLAs) play a key role in many optoelectronic devices, and 100% fill-factor CMLAs also have the advantage of improving the signal-to-noise ratio and avoiding stray-light effects. However, the existing preparation technologies are complicated and costly, which are not suitable for mass production. Herein, we propose a simple, efficient, and low-cost manufacturing method for CMLAs with a high fill-factor via the electric-field-driven (EFD) microscale 3D printing of polydimethylsiloxane (PDMS). By adjusting the printing parameters, the profile and the fill-factor of the CMLAs can be controlled to improve their optical performance. The optical performance test results show that the printed PDMS CMLAs have good image-projecting and light-diffraction properties. Using the two printing modes of this EFD microscale 3D-printing technology, a cylindrical dual-microlens array with a double-focusing function is simply prepared. At the same time, we print a series of specially shaped microlenses, proving the flexible manufacturing capabilities of this technology. The results show that the prepared CMLAs have good morphology and optical properties. The proposed method may provide a viable route for manufacturing large-area CMLAs with 100% fill-factor in a very simple, efficient, and low-cost manner.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c08652.EFD microscale 3D-printing principle and two printing modes; microfluidic chip structure and mixing effect verification; comparison of nanoimprint results of different hybrid methods of PDMS; effect of the nozzle size on the printing line width and height; effect of the printing height on the printing line width and height; schematic diagram of the imaging experiment of the PDMS CMLA; schematic diagram of the imaging experiment of the PDMS CMLA; and comparison of CMLAs manufactured by various technologies (PDF)High-speed photography of the micro-extrusion printing mode (MP4)Printing CMLAs with 100% fill-factor using the micro-extrusion mode (MP4)High-speed photography of the continuous cone jet printing mode (MP4)Printing CMLAs with 100% fill-factor using a continuous cone jet mode (MP4)Printing cylindrical dual-MLAs via two printing modes of EFD microscale 3D printing (MP4)Printing phoenix-shaped specially shaped microlenses by the continuous cone jet mode (MP4)Printing phoenix-shaped specially shaped microlenses by the microextrusion mode (MP4)This article has not yet been cited by other publications.

100% Fill-Factor Aspheric Microlens Arrays (AMLA) with Sub-20-nm Precision

High-Efficiency Fabrication of Aspheric Microlens Arrays by Holographic Femtosecond Laser-Induced Photopolymerization

High-speed, large-area and high-precision fabrication of aspheric micro-lens array based on 12-bit direct laser writing lithography

Fabrication of High Fill-Factor Aspheric Microlens Array by Dose-Modulated Lithography and Low Temperature Thermal Reflow

Cost-efficient and Flexible Fabrication of Rectangular-Shaped Microlens Arrays with Controllable Aspect Ratio and Spherical Morphology

A Simple Way to Fabricate Close-Packed High Numerical Aperture Microlens Arrays

Adjusting light distribution for generating microlens arrays with a controllable profile and fill factor

Fabrication of High Quality Aspheric Microlens Array by Dose-Modulated Lithography and Surface Thermal Reflow

Fabrication of High Fill-Factor Microlens Array Using Spatially Constrained Thermal Reflow

Facile and Flexible Fabrication of Gapless Microlens Arrays Using A Femtosecond Laser Microfabrication and Replication Process

Femtosecond Laser Fabrication of Submillimeter Microlens Arrays with Tunable Numerical Apertures

Fabrication of high aspect-ratio aspheric microlens array based on local spiral diamond milling

Fabrication of Microlens Array with Controllable High NA and Tailored Optical Characteristics Using Confined Ink-Jetting

Fabrication of the Asymmetric Double-Sided Concave Microlens Arrays by Femtosecond Laser

High Numerical Aperture Microlens Arrays Of Close Packing

High fill factor microlens array fabrication using direct laser writing and its application in wavefront detection.

Morphology adjustable microlens array fabricated by single spatially modulated femtosecond pulse

Fabrication of High-Quality Microlens Arrays on Fused Silica Based on Combined Rapid Evaporative Ablation and Precision Melting Polishing of CO2 Lasers

3D Printing of a PDMS Cylindrical Microlens Array with 100% Fill-Factor

Design And Fabrication Of Wafer-Level Microlens Array With Moth-Eye Antireflective Nanostructures

Rapid fabrication of quasi-periodic aspherical concave microlens array with different focal lengths on fused silica by shaping picosecond laser-induced multi-step wet-etching for multi-layer optical imaging