Abstract:Microlens arrays (MLAs) made from fused silica possess broad applications in wavefront sensing, optical focusing, beam shaping, etc. However, it is challenging to fabricate the hard-brittle silica MLAs with high accuracy and low cost by conventional manufacturing techniques efficiently. In this work, a novel two-step method, which consists of rapid evaporative ablation and precision melting polishing by CO2 lasers, is proposed to fabricate high-quality MLAs. The first step is to rapidly ablate and engrave micro-pillar arrays (MPAs) with flat groove bottom by high-energy density CO2 lasers. The second step is to precisely polish and shape the flat-topped MPAs into the dome-topped MLAs with good surface roughness (Sa) by low-energy density CO2 lasers. The whole preparation process could be achieved through a set of machining system. Firstly, the geometric dimension (period, p and height, h) of the microlens is determined by the Monte Carlo ray tracing method. Secondly, to diminish the groove depth inconsistency caused by heat accumulation, the multiple ablation compensation strategy is developed. The MPAs (p = 200-400 mu m), of which maximum height error is 7.1%, are prepared in 1 s by the proposed compensation strategy. Then, the MPAs are smoothed into the MLAs by lowenergy density CO2 lasers, and the average Sa is improved from 960 nm to 32.56 nm. Finally, the optical performances of the MLAs are verified from the effectiveness of imaging, focusing and homogenization. The proposed two-step processing method paves a new way to fabricate high-performance MLAs on hard-brittle fused silica with low cost and high efficiency.

Soft Mold of Microlens Arrays Fabricated by Surface Self-Assembly

Mold-Free Self-Assembled Scalable Microlens Arrays with Ultrasmooth Surface and Record-high Resolution

Sol–gel concave micro-lens arrays fabricated by combining the replicated PDMS soft mold with UV-cured imprint process

Using Micromachined Molds, Partial-curing PDMS Bonding Technique, and Multiple Casting to Create Hybrid Microfluidic Chip for Microlens Array

Facile and Flexible Fabrication of Gapless Microlens Arrays Using A Femtosecond Laser Microfabrication and Replication Process

A Facile Method to Fabricate Close-Packed Concave Microlens Array on Cylindrical Glass

Microlens arrays prepared via colloidal microsphere templating

An Ultraviolet-Lithography-Assisted Sintering Method for Glass Microlens Array Fabrication

Microlens Arrays: Fabrication of Microlens Arrays with Well-controlled Curvature by Liquid Trapping and Electrohydrodynamic Deformation in Microholes (adv. Mater. 23/2012)

Fabrication of Close-Packed Microlens Array with Superhydrophobicity and High Imaging Performance

Microlens arrays prepared via colloidal crystal templating

Polymeric microlens array formed on a discontinuous wetting surface using a self-assembly technique

Maskless Fabrication Of Concave Microlens Arrays On Silica Glasses By A Femtosecond-Laser-Enhanced Local Wet Etching Method

Fabrication of High-Quality Microlens Arrays on Fused Silica Based on Combined Rapid Evaporative Ablation and Precision Melting Polishing of CO2 Lasers

Fabrication of Microlens Arrays Based on Spatial Light Modulator

Fabrication of a double-sided micro-lens array by a glass molding technique

Rapid Fabrication of A Large-Area Close-Packed Quasi-Periodic Microlens Array on Bk7 Glass

Micropatterning Microlens Arrays Fabricated by A Femtosecond Laser Wet Etch Process

Cost-efficient and Flexible Fabrication of Rectangular-Shaped Microlens Arrays with Controllable Aspect Ratio and Spherical Morphology

Rapid Fabrication of Curved Microlens Array Using the 3D Printing Mold

Fabrication of High Numerical Aperture Micro-Lens Array Based on Drop-On-Demand Generating of Water-Based Molds