Abstract:This paper presents the design, fabrication, and characterization of a MEMS actuator with large static deflection as a waveguide-mounted variable millimeter-wave phase shifter. The actuator is composed of a pair of interdigitated microplates actuated by vertical comb-drives and suspended by SU-8 torsional springs. The SU-8 spring possesses a thin metallization top layer and a reverse-T-shaped cross-section enabling low torsional stiffness and high in-plane stability. A maximum mechanical deflection of 10.3 degrees is obtained under a dc actuation voltage of 35 V. The dynamic characterization of the device shows that the resonance frequency of the torsional mode is well separated from the other three bending modes, confirming the designed low torsional stiffness and high in-plane stability. The torsional viscoelastic creeping is measured as a function of time at different loads and shows a maximum of 0.5 degrees for an applied voltage of 27.5 V. A high operation cycle test is conducted and the metalized SU-8 spring withstands 800 million cycles without showing fatigue. RF measurements show that a variable mechanical deflection angle between 0 degrees and 8.2 degrees results in a variable transmission phase shift up to 58.0 degrees. The measured insertion loss is always below 5.1 dB at 98 GHz, corresponding to a figure of merit of 11.5 degrees/dB. [2012-0338]

A Large Out-of-plane Motion Mechanism for Optical Applications

Process Platform For High Aspect-Ratio Self-Aligned Vertical Comb Actuators

The BELST II Process for a Silicon High-Aspect-ratio Micromaching Vertical Comb Actuator and Its Applications

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Design and Research on Large Displacement Bidirectional MEMS Stage with Interlock Mechanism

Design and Fabrication of Multi-Degrees-of-freedom Single Crystal Silicon Moveable Platforms on SOI Wafer

Post-CMOS Processing for High-Aspect-Ratio

Large Stroke Staggered Vertical Comb-Drive Actuator for the Application of a Millimeter-Wave Tunable Phase Shifter

Monolithic Bi-directional Linear Microactuator for Light Beam Manipulation

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

A Poly-Si-Based Vertical Comb-Drive Two-Axis Gimbaled Scanner for Optical Applications

Realization of Three-Dimensionally MEMS Stacked Comb Structures for Microactuators Using Low-Temperature Multi-Wafer Bonding with Self-Alignment Techniques in CMOS-Compatible Processes

Silicon-On-Insulator Out-Of-Plane Electrostatic Actuator with in Situ Capacitive Position Sensing

Torsion-mirror Actuators with Compound Electrostatic Driving Structures

Fabrication of Micro Torsional Actuator Using Surface Plus Bulk Micromachining Processes

Development of a Multistage Compliant Mechanism with New Boundary Constraint

Self-Latched Micromachined Mechanism with Large Displacement Ratio

Design of a Large-Stroke Bistable Mechanism for the Application in Constant-Force Micropositioning Stage

Two-dimensional Silicon-on-glass Actuator Combined with a Dispensed Polymer Microlens

A two-dimensional silicon-on-glass actuator with dispensed polymer microlens

Amplifying transmission and compact suspension for a low-profile, large-displacement piezoelectric actuator