Abstract:This study deals with the effect of conventional sintering and microwave sintering on the densification kinetics of Titanium Carbide (TiC) in the presence of Ni (1, 1.5, 2 wt%). TiC compacts were obtained after uniaxial pressing of powders synthesised by ball milling of Titanium and Carbon and sintering was done in the presence of Nickel. The samples prepared were subjected to conventional as well as microwave sintering. The XRD and SEM analysis were used for a study of the reaction of Ti and C powders upon addition of Ni, which reduced the sintering temperature to 1200 °C. The densification of TiC powders was due to the Ti-Ni eutectic system, the liquid phase formed at this temperature assisting the sintering process. The SEM images revealed the flake like structure of TiC in which the carbon diffused into Ti upon the addition of Ni, thereby supporting enhanced mass transfer. The XRD pattern showed the presence of Titanium Oxide (TiO2) along with TiC which resulted in non-uniform distribution of hardness. Maximum hardness was achieved in the conventional sintered compacts which gradually increased with increase in Ni addition. The presence of the oxide phase and the formation of micro cracks resulted in non-uniform hardness for microwave sintered compacts. The maximum hardness of conventional sintered compact (375 HLD) was nearly 1.5 times more than the maximum hardness of the microwave sintered compact (250 HLD). The density of the microwave sintered compact was found to be higher by 8% than with the conventionally sintered compact.

In-situ Combustion Synthesis and Densification of TiC–xNi Cermets

Combustion synthesis and densification of large-scale TiC–xNi cermets

One-step Preparation of Dense TiC1 − Xnx–ni3ti Cermet by Combustion Synthesis

Research on TiC-Ni-Mo Composites by Combustion Synthesis

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Thermal physical properties of TiC-xNi cermets produced by combustion synthesis

Combustion Synthesis of TiB-Ti Cermets

Investigation of TiC formation during ball-milling of elemental titanium and carbon

COMBUSTION SYNTHFSIS AND DENSIFICATION BY GAS HOT ISOSTATIC PRESSURE OF AIN- TiB2 CERAMIC WITHOUT ENVELOPE

Mechanism of Combustion Synthesis of TiC-Ti Cermet

Fast Preparation of ZTA-TiC-FeCrNi Cermets by High-Gravity Combustion Synthesis

Effect of Fe on the Phases and Microstructure of TiC–Fe Cermets by Combustion Synthesis/quasi-Isostatic Pressing

Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites

The Combustion Synthesis Of Si3n4-Tin-Sic Multiphase Ceramics

Synthesis of TiB 2 /Ti(C,N) cermet by RSPS: formation mechanism, shrinkage behavior, and mechanical properties

Research on TiC-Ni cermets by SHS and pseudo heat isostatic pressing

Study on the Combustion Synthesis of Si3N4-SiC-TiN Ceramics

Self-propagating high temperature combustion synthesis of TiB/Ti composites

INFLUENCE OF Ni CONTENT ON TiC-Ni CERMETS BY SHS/PHIP

Microstructures, Densification and Mechanical Properties of TiC–Al2O3–Al Composite by Field-Activated Combustion Synthesis

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures