Abstract:Complete solid-solution Ti(C,N)-based cermet, with no typical core-rim structure, was synthesized through mechanical activation and subsequent in situ carbothermal reduction method. XRD, SEM, TEM, and C/N analysis were used to investigate the microstructure, phase transformation, and the interfacial characteristics of the present cermets. During solid-state sintering, the (Ti,Mo)C/(Ti,Mo)(C,N) phases formed through the transformation of Mo-based solid solution which generated by mechanical activation. Then, the formed (Ti,Mo)C/(Ti,Mo)(C,N) continuously dissolved into the nickel-based binder above 1100 °C. It was found that in the subsequent stage of liquid sintering, the mechanical activation and also the presence of extremely fine TiC/Ti(C,N) particles accelerated the Mo diffusion into the hard phase, resulting in a large quantity of (Ti,Mo)(C,N) solid solutions formed in the nickel-based binder. Finally, complete (Ti,Mo)(C,N) solid-solution phase was obtained via dissolution and re-precipitation. The higher toughness and transverse rupture strength (TRS) of the synthesized new cermet, as compared with traditional cermets, were mainly caused by the increased crack deflection and transgranular fracture of the novel cermets. Moreover, the interface among the Ni-based binder phase and complete solid solution hard phase exhibited a semi-coherency state with high-density dislocations, which also significantly improved the TRS and toughness of the synthesized cermets.

Combustion synthesis and densification of large-scale TiC–xNi cermets

In-situ Combustion Synthesis and Densification of TiC–xNi Cermets

Research on TiC-Ni-Mo Composites by Combustion Synthesis

Combustion Synthesis of TiB-Ti Cermets

One-step Preparation of Dense TiC1 − Xnx–ni3ti Cermet by Combustion Synthesis

Thermal physical properties of TiC-xNi cermets produced by combustion synthesis

Research on TiC-Ni cermets by SHS and pseudo heat isostatic pressing

MECHANICAL PROPERTIES OF TiC-Ni PRODUCED BY SHS AT ROOM AND HIGH TEMPERATURES

Effect of Fe on the Phases and Microstructure of TiC–Fe Cermets by Combustion Synthesis/quasi-Isostatic Pressing

Self-propagating high temperature combustion synthesis of TiB/Ti composites

Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites

TiC-Fe cermets fabricated by SHS

Large-scale (Ti,Cr)B2-Cu composite by combustion synthesis

Thermite Synthesis of TiC/FeNiCr Cermet with Double-Layer Structure

Self-propagating high-temperature synthesis of TiC-TiB2/Cu ceramic-matrix composite

INFLUENCE OF Ni CONTENT ON TiC-Ni CERMETS BY SHS/PHIP

Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis

Enhanced Densification of Ultrafine Ti(C, N)-based Cermets Based on Grain-Growth Induced Liquid-Phase Pore Filling Mechanism

Fast Preparation of ZTA-TiC-FeCrNi Cermets by High-Gravity Combustion Synthesis

Evolution of microstructure and interfacial characteristics of complete solid-solution Ti(C,N)-based cermets fabricated by mechanical activation and subsequent in situ carbothermal reduction