Abstract:The size, distribution, and morphology of TiC particle in Fe–Ti–C system have a great influence on the mechanical properties of TiC/Fe composites. In this work, TiC/Fe composites were fabricated in the Fe–Ti–C system with different carbon source and molar ratio by combustion synthesis and hot-pressing method. Morphology and size of ceramic particles, as well as microstructure, interface bonding and mechanical properties of composites were compared. The results showed that the size of TiC particles decreased with increase of Fe content of Fe–Ti–C systems fabricated by the same carbon source, while the particles change from spherical shapes to cubic shapes which can reduce stress concentration between ceramic particles and matrix. Furthermore, TiC/Fe composites fabricated by 5Fe–Ti-carbon blacks (CBs) system exhibited superior yield strength (1523 MPa) compressive strength (2203 MPa) and microhardness (691.5 HV), caused by the high interface bonding strength and lamellar pearlite matrix which can commendably limit the dislocation slip. By comparison, TiC/Fe composites fabricated by 21Fe–Ti-carbon nanotubes (CNTs) system showed higher fracture strain (25.85%) on account of the ferrite matrix with favorable plastic. This work reveals the influence of carbon source and molar ratio of Fe–Ti–C system on TiC/Fe composites, which is helpful to further improve the properties of TiC/Fe composites.

Effect of Fe on the Phases and Microstructure of TiC–Fe Cermets by Combustion Synthesis/quasi-Isostatic Pressing

TiC-Fe cermets fabricated by SHS

Microstructural evolution during combustion synthesis of TiC-Fe cermet

Combustion Synthesis of TiB-Ti Cermets

The effect of carbon source and molar ratio in Fe–Ti–C system on the microstructure and mechanical properties of in situ TiC/Fe composites

Effects of particle size of reactant on characteristics of combustion synthesis of TiC-Fe cermet

Combustion synthesis and densification of large-scale TiC–xNi cermets

Investigation on microstructure of TiC-Fe cermets prepared by SHS/PHIP

In-situ Combustion Synthesis and Densification of TiC–xNi Cermets

DENSE TiC-Al2O3-Fe CERMET FABRICATED BY SHS

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field

Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering

Research on TiC-Ni-Mo Composites by Combustion Synthesis

INFLUENCE OF Ni CONTENT ON TiC-Ni CERMETS BY SHS/PHIP

Role of iron addition in the combustion synthesis of TiC–Fe cermet

Microstructural evolution of the titanium particles in the in-situ composition of TiC–Fe by the combustion synthesis

The influences of cu content on the self-propagating high temperature synthesized TiC-TiB2 composites

Microstructural evolution during the combustion synthesis of TiC–Al cermet with larger metallic particles

Microstructure evolution of Fe-Ti-C system synthesized by low temperature combustion induced in electric field

Fast Preparation of ZTA-TiC-FeCrNi Cermets by High-Gravity Combustion Synthesis

Combustion Synthesis of TiC–Fe Composites under the Action of an Electric Field