Abstract:Si3N4–TiN–SiC composites were prepared by partial substitution of the Ti–Si–Fe alloy extracted from high-titanium blast furnace slag for Si under nitrogen atmosphere. The nitridation, microstructure and mechanical properties of the composites were investigated in detail. The results show that Ti–Si–Fe alloy facilitated the nitridation of Si and full nitridation of Si was achieved in the compacts with 3.6–5.4 wt.% Ti–Si–Fe alloy additive, and thus, densification and mechanical performances of the composites were improved obviously. Propagating of microcracks induced by the volume expansions accompanying with the conversion of Ti5Si3 and TiSi2 to nitrides at 950–1050 °C built new N2(g) transport channels in the compacts. In the following up nitridation process, adequate N2(g) was transported through these channels into the compacts to fundamentally enhance contact of N2 with Si, facilitate and ensure the complete nitridation of internal Si. Moreover, the Ti–Si–Fe–Mn–N eutectic liquid played an important role in the formation of both α- and β-Si3N4, and the Fe in the Ti–Si–Fe alloy was of great importance for the formation of fibrous Si3N4 by the reaction between SiO(g) and N2(g).

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Synthesis of Si3N4–TiN–SiC Composites by Combustion Reaction under High Nitrogen Pressures

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Study on the Combustion Synthesis of Si3N4-SiC-TiN Ceramics

Effect of nitrogen pressure on combustion synthesis of Si3N4-SiC-TiN ceramic

Reaction Mechanisms of Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> -SiC -TiN Ceramics

Preparation of Si3N4–TiN–SiC composite by partial substitution of Ti–Si–Fe alloy for Si under N2 atmosphere

Synthesis of TiN-Si3N4 Composites from Rutile and Quartz by Carbothermal Reduction Nitridation

Reaction Mechanisms of Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> -Sic -Tin Ceramics

Reaction mechanisms of combustion synthesis of Si3N4 -SiC -TiN ceramics

Combustion Synthesis of Ti(C,N) Powder

MICROSTRUCTURE OF Si3N4-TiN-SiC CERAMICS DURING COMBUSTION SYNTHESIS PROCESS

Combustion Synthesis of AlN–SiC Solid Solution Particles

The Combustion Synthesis Of Si3n4-Tin-Sic Multiphase Ceramics

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Preparation and properties of TiN–Si3N4 composites

Thermogravimetry, Differential Thermal Analysis, And Mass Spectrometry Study Of The Silicon Nitride-Boron Carbide-Carbon Reaction System For The Synthesis Of Silicon Carbide-Boron Nitride Composites

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Synthesis of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt;-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Synthesis of Si3N4–TiN–SiC Composites by Combustion Reaction under High Nitrogen Pressures

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Study on the Combustion Synthesis of Si3N4-SiC-TiN Ceramics

Effect of nitrogen pressure on combustion synthesis of Si3N4-SiC-TiN ceramic

Reaction Mechanisms of Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> -SiC -TiN Ceramics

Preparation of Si3N4–TiN–SiC composite by partial substitution of Ti–Si–Fe alloy for Si under N2 atmosphere

Synthesis of TiN-Si3N4 Composites from Rutile and Quartz by Carbothermal Reduction Nitridation

Reaction Mechanisms of Combustion Synthesis of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; -Sic -Tin Ceramics

Reaction mechanisms of combustion synthesis of Si3N4 -SiC -TiN ceramics

Combustion Synthesis of Ti(C,N) Powder

MICROSTRUCTURE OF Si3N4-TiN-SiC CERAMICS DURING COMBUSTION SYNTHESIS PROCESS

Combustion Synthesis of AlN–SiC Solid Solution Particles

The Combustion Synthesis Of Si3n4-Tin-Sic Multiphase Ceramics

Combustion Synthesis of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; from Si/NH&lt;sub&gt;4&lt;/sub&gt;Cl at Low Nitrogen Pressure

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Preparation and properties of TiN–Si3N4 composites

Thermogravimetry, Differential Thermal Analysis, And Mass Spectrometry Study Of The Silicon Nitride-Boron Carbide-Carbon Reaction System For The Synthesis Of Silicon Carbide-Boron Nitride Composites

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Reaction Mechanisms of Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> -Sic -Tin Ceramics

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure