Abstract:An investigation was conducted to study the hydraulic characteristics of internal loop fluidized bed with cross-shape baffle setting on the bottom of the reactor. According to the properties of multi-phase mixing and collision, the cross-shape baffle leads to the transformation of chaotic to orderly, offering a new way for controlling hydrodynamics. The liquid circulation velocity and mixing time of the reactor were measured by the conductivity method, and compared with the conventional fluidized bed to indicate the fact of promoting gas-liquid-solids mixing. It was shown that the liquid circulation velocity in the riser and that in the downcomer were increased by 9.5% ± 1.0% and 11.8% ± 1.0% of those without the cross-shape baffle. When superficial gas velocity was less than 0.86 cm · s-1, liquid mixing time increased with setting the cross-shape baffle. Liquid mixing time decreased when superficial gas velocity was above 0.86 cm · s-1. Frictional loss coefficient at the bottom section reduced from 4.13 to 2.75 with setting the cross-shape baffle, resulting in obvious decrease of energy dissipation due to flow collision. Based on an energy balance over the loop, a correlation equation between liquid circulation velocity and frictional loss coefficient was established. For the three-phase system, the prediction values from the above correlation equation agreed with the measurements within 8%. The result indicated that the cross-shape baffle brought order into the turbulent fluidized flow regime as well as improved the hydrodynamics performance of the reactor.

MIXING CHARACTERISTICS OF TRIPLET LOOP BIOLOGICAL FLUIDIZED BED REACTORS

HYDRODYNAMICS AND MASS TRANSFER OF TRIPLET LOOP BIOLOGICAL FLUIDIZED BED

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Residence time distribution in a new horizontal self-cleaning reactor with viscous media

Mixing characteristics of fixed bed bubble reactor

Structure effect of industrial loop reactors on non-uniform flow characteristics

Internal Circle Time of a Three-Phase Inner-Loop Biological Fluidized Bed

Flow Field Reconstruction in Novel Fluidized Bed by CFD Simulation

Relationship between Reactor Performances and Structural Parameters of Inner-loop Three-phase Fluidized Bed

Study on mixing time of gas-liquid loop reactor with tri-layer gas distribution

Flow mixing model of liquid phase in an internal airlift loop reactor

Study on Flow Pattern in A Tubular Oscillatory Flow Reactor

Study on three-phase Newtonian fluid in an internal loop airlift reactor with a convergence-divergence draft tube

Hydraulic characteristics of internal loop fluidized bed with baffle setting on bottom

Flow Behavior of Liquid Phase in Jet-loop Reactor

Backmixing characterization of liquid phase in ebullated bed reactor

Flow characteristics and mixing properties in a high velocity liquid—solid loop reactor

Computational Fluid Dynamics–Discrete Element Model Simulation of Flow Characteristics and Solids’ Residence Time Distribution in a Moving Bed Air Reactor for Chemical Looping Combustion

Study on the characteristics of oxygen transfer in new-type structure inner loop three-phase fluidized bed

Influence of funnel-shape internals on hydrodynamics and mass transfer in internal loop three-phase fluidized bed