Abstract:Chemical looping combustion (CLC) is an efficient, clean and cheap technology for CO2 capture, and an interconnected fluidized bed is more appropriate solution for CLC. This paper aims to design a reactor system for CLC, carry out cold-model experiment of the system, and model fuel reactor using commercial CFD software. As for the CLC system, the air reactor (AR) is designed as a fast fluidized bed while the fuel reactor (FR) is a bubbling bed; a cyclone is used for solid separation of the AR exit flow. The AR and FR are separated by two U-type loop seals to remain gas sealed. Considered the chemical kinetics of oxygen carrier, fluid dynamics, pressure balance and mass balance of the system simultaneously, some key design parameters of a CH4-fueled and Fe2O3/Al2O3-based CLC reactor (thermal power of 50 kWth) are determined, including key geometric parameters (reactor cross-sectional area and reactor height) and operation parameters (bed material quantity, solid circulation rate, apparent gas velocity of each reactor). A cold-model bench having same geometric parameters with its prototype is built up to study the effects of various operation conditions (including gas velocity in the reactors and loop seals, and bed material height, etc.) on the solids circulation rate, gas leakage, and pressure balance. It is witnessed the cold-model system is able to meet special requirements for CLC system such as gas sealing between AR and FR, the circulation rate and particles residence time. Furthermore, the thermal FR reactor with oxygen carrier of Fe2O3/Al2O3 and fuel of CH4 is simulated by commercial CFD solver FLUENT. It is found that for the design case the combustion efficiency of CH4 reaches 88.2%. A few part of methane is unburned due to fast, large bubbles rising through the reactor.

Computational Fluid Dynamics–Discrete Element Model Simulation of Flow Characteristics and Solids’ Residence Time Distribution in a Moving Bed Air Reactor for Chemical Looping Combustion

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

Study of Flow Patterns in a Moving Bed Reactor for Chemical Looping Combustion Based on Machine Learning Methods

Prediction of Bubble Fluidisation During Chemical Looping Combustion Using CFD Simulation

Computational Study of Solid Circulation in Chemical-Looping Combustion Reactor Model

Numerical Simulation of a 3D Full Loop Ig-Clc System Including a Two-Stage Counter-Flow Moving Bed Air Reactor

Numerical simulation of solid circulation mechanism and gas flow paths in a chemical looping combustion system

Reactor Design, Cold-Model Experiment and CFD Modeling for Chemical Looping Combustion

Fluid Dynamic Simulation in a Chemical Looping Combustion with Two Interconnected Fluidized Beds

Experimental Investigation on Flow Behaviors in A Novel in Situ Gasification Chemical Looping Combustion Apparatus

Three-Dimensional Full-Loop Simulation of Gas–Solid Flow Behaviors in a Chemical Looping Gasification System with a Two-Staged Fuel Reactor

Numerical Investigation of Hydrodynamics and Cluster Characteristics in a Chemical Looping Combustion System

Multiphase CFD Modeling for a Chemical Looping Combustion Process (fuel Reactor)

Simulation of Flow Behavior of Particles by Cluster Structure-Dependent Drag Coefficient Model for Chemical Looping Combustion Process: Air Reactor Modeling

Design and Operation of a Multi-Stage Reactor System for Chemical Looping Combustion Process

Development and Testing of an Interconnected Fluidized‐Bed System for Chemical Looping Combustion

A Hydrodynamic Study of A Fast-Bed Dual Circulating Fluidized Bed for Chemical Looping Combustion

Hydrodynamics of interconnected fluidized beds for chemical-looping combustion

Numerical Investigation of a 1MW Full-Loop Chemical Looping Combustion Unit with Dual CFB Reactors

Cold-flow Model Experiment of Interconnected Fluidized Bed for Chemical Looping Combustion of Coal