Abstract:The in-depth understanding of the gas–solid flow and reaction behaviors, and their coupling characteristics during the chemical looping combustion (CLC) process has the guiding significance for the operation and optimization of a chemical looping combustor. A three-dimensional numerical model is applied to investigate the char-fueled CLC characteristics in a fuel reactor for efficient CO2 separation and capture. Simulations are carried out in a bubbling fluidized bed fuel reactor with a height of 2.0 m and a diameter of 0.22 m. The initial bed height is 1.1 m, and hence the height–diameter ratio of the slumped bed is five. The oxygen carrier is prepared with 14 wt% of CuO on 86 wt% of inert Al2O3. In the process of mathematical modeling, a Eulerian-Eulerian two-fluid model is adopted for both of the gas and solid phases. Gas turbulence is modeled on the basis of a k–ε turbulent model. The reaction kinetics parameters are addressed based upon previous experimental investigations from literature. During the simulation, the gas–solid flow patterns, composition distributions, and reaction characteristics are obtained. Moreover, the effects of solids inventory and fluidizing number on the reaction performance are elucidated in-depth. The results have shown that the reaction rates have close relationship with the flow patterns and the distributions of gas concentrations. Compared to the steam-char gasification over sand, the application of char-fueled CLC can effectively promote the conversion of gasification products. In addition, higher CO2 concentration at the outlet can be achieved by increasing the initial solids inventory or decreasing the fluidizing number. Some calculated values are verified by the previous data, indicating that the current three-dimensional models are reasonable to study the process mechanism of char-fueled CLC.

Experimental Investigation on Flow Behaviors in A Novel in Situ Gasification Chemical Looping Combustion Apparatus

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

Hydrodynamic Study on the Riser of Chemical Looping Hydrogen Production System with Multiple Fluidized Bed Reactors

Development and Testing of an Interconnected Fluidized‐Bed System for Chemical Looping Combustion

Prediction of formation of gas-phase bubbles correlated by vortices in the fuel reactor of chemical looping combustion

Investigation of a Coupled Fuel Reactor for Coal-Fueled Chemical Looping Combustion

Numerical Investigation of a 1MW Full-Loop Chemical Looping Combustion Unit with Dual CFB Reactors

Numerical Investigation of a Syngas-Fueled Chemical Looping Combustion System

Three-Dimensional Full-Loop Simulation of Gas–Solid Flow Behaviors in a Chemical Looping Gasification System with a Two-Staged Fuel Reactor

Test Operation of a Separated-Gasification Chemical Looping Combustion System for Coal

Numerical simulation of a chemical looping combustion of biomass: Hydrodynamic investigation

Three-dimensional Simulation of a Gas-Fueled Chemical Looping Combustion System with Dual Circulating Fluidized Bed Reactors

Configuration Optimization of a Biomass Chemical Looping Gasification (CLG) System Combined with CO2 Absorption

Insights into the gas-solid hydrodynamics and thermochemical characteristics in a pilot-scale chemical looping combustion unit using MP-PIC

System Hydrodynamics of a 1 MWth Dual Circulating Fluidized Bed Chemical Looping Gasifier

Solid Circulation Study in a 1.5 MWth Cold Flow Model of Chemical Looping Combustion

Design of an Industrial Chemical Looping Gasification System

Numerical Investigation of Solid-Fueled Chemical Looping Combustion Process Utilizing Char for Carbon Capture

Research and Development of Coal-fueled Chemical Looping Combustion