Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Flow Field Reconstruction in Novel Fluidized Bed by CFD Simulation

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Optimization of flow field in oxidation zone and experimental study for new AmOn bioreactor

Computational fluid dynamics simulation of hydrodynamics in an internal-loop fluidized bed reactor with a funnel-shaped internal

Analysis for numerical optimization on square fluidized bed with altering structural parameters and internals reinforcement

A Two-Phase CFD Modeling Approach to Investigate the Flow Characteristics in Radial Flow Moving-Bed Reactors

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

3-D Full-Loop Simulation of a High-Density Circulating Fluidized Bed

Numerical Optimization on Hydrodynamic Characteristics of Internal-Loop Fluidized Bed Based Upon Structure Parameter Response Relationships

CFD Simulation of the Flow Patterns and Structure Optimization Within a Continued-Flow Integrated Biological Reactor

Optimization of the Internal Circulating Fluidized Bed Using Computational Fluid Dynamics Technology

CFD Simulation Study of Internal Mixing and Flow of a Modified Airlift Bioreactor

Progress in the study of novel circulating fluidized bed reactors

HYDRODYNAMICS AND MASS TRANSFER OF TRIPLET LOOP BIOLOGICAL FLUIDIZED BED

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

Flow Field Research of the Reciprocating Baffled Flocculation Tank

Computational Fluid Dynamics–Discrete Element Model Simulation of Flow Characteristics and Solids’ Residence Time Distribution in a Moving Bed Air Reactor for Chemical Looping Combustion

Computational Particle Fluid Dynamics Simulation of Gas–solid Flow in a 3 MWth Dual-Circulation Fluidized Bed for Chemical Looping Process

Numerical Simulation of Hydrodynamic Behaviors of Internal Circulation Bio-Fluidized Bed Reactor

CFD Simulation of Internal Flow Field of Three-Phase Fluidized Bed Reactor with Internal Circulation

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension