Abstract:Fluidization of gas-solid system is long-standing subject of basic research. As a result of fluid-particle intensive contact, an isothermal system with superior heat and mass transfer abilities favors its use for chemical reactions, mixing, drying, and other applications. Inspire of huge benefits, number of problems are still associated with gas-solid fluidization system. Solid properties, in particular, particle size and size distribution significantly affect the interaction/contacting between particles, their movement and the fluid-particle mixing. Distinct macroscopic phenomena of plug formation, channeling and particle agglomeration was observed with increasing superficial gas velocity in conventional fluidized bed of fine/nano-particles (group C in the Geldart classification) due to strong interparticle forces. The concept of powder–particle fluidized bed (PPFB) was first introduced by Kato et al. in early 1990s [1]. It is known to be a useful technique to fluidize group C particles without external aid like acoustic, centrifugal, magnetic, stirring and/or vibrating fields, etc. In the PPFB process, fine powders (group C) are fluidized with coarse particles (group B). The bimodal fluidized bed system at steady state gives a certain stable hold-up of fine powders in the bed [2]. Many investigators, Sun and Grace [3], and Xue et al. [4] studied bi-modal fluidization in bubbling or turbulent regimes, while, Wei et al. [5] and Du [6, 7] concentrate on CFBs. The investigation of Xue et al. showed that by adding coarse particles fluidization quality of fine particles could improve [4]. Extensive studies of Wei et al. indicated that the addition of coarse particles to a fluid catalytic cracking (FCC) riser decreased the lateral solids mixing and had insignificant influence on axial solids mixing [5]. Du et al. studied the axial and lateral mixing by using tracer particles of different sizes in a FCC riser and found that the axial solids back mixing increased, while radial solids mixing decreased with the increase of particle size and density. Recently, Zeeshan et al. explained bi-modal/bi-particle fluidized bed system hydrodynamics, attrition, mixing behaviour, and its applications [8]. Stable and uniform heat transfer in Fluidized Bed Reactors (FBR) without providing provisions of external or internal source is a difficult task for designers. As continuous heat supply and deduction is a necessary part of FBR operation for controlling highly endothermic and exothermic reactions, respectively. The state-of-the-art idea of bi-modal particle (Gas-Solid-Solid) fluidization is given by FLOTU, in order to overcome above said reaction barriers in a fluidized bed technology. In this chapter, a comprehensive overview of

Progress in the study of novel circulating fluidized bed reactors

Flow Distribution in a Novel Fixed Bed Bionic Reactor

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Dual-dense gas-solid circulating fluidized bed reactor

Control of Pressure Balance and Solids Circulation Characteristics in DCFB Reactors

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Comparison of flow dynamics and reactor performance in gas-solids circulating turbulent fluidized bed with other fluidized beds across regimes

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Numerical and experimental investigation of an “S-shaped” circulating fluidized bed

Effects of Operating Parameters on Solids Flux in a High-Density/-Flux Circulating Fluidized Bed Riser Reactor

CFD Simulations of Gas–liquid–solid Flow in Fluidized Bed Reactors — A Review

Discussion on Some Aspects of Circulating Fluidized Bed Design

Discussion on the influence of internal components on the flow field distribution of a new gas–solid non-catalytic fluidized bed (NRFB)

CFD Simulation of the Flow Patterns and Structure Optimization Within a Continued-Flow Integrated Biological Reactor

STUDY ON SOLIDS MIXING BEHAVIOR IN RISER-DOWNER-COUPLING CIRCULATING FLUIDIZED BED

Characteristics and diverse applications of (gas)-liquid-solid circulating fluidized beds: A comprehensive review

Optimization of the Internal Circulating Fluidized Bed Using Computational Fluid Dynamics Technology

Flow Field Reconstruction in Novel Fluidized Bed by CFD Simulation

Integrated Approach For Heat Transfer In Fluidized Bed Reactors