Abstract:A Taylor–Couette (TC) reactor has been considered as a promising technology to produce uniform ultra-fine particles with controlled morphology and size because of its rather narrow shear rate distribution in comparison to a conventional stirred tank. However, small particles in the TC reactor are likely entrapped by the Taylor vortices and concentrated more in the core of the vortices, thus having an adverse or a positive impact on producing the uniformly fine particles. To mitigate this disadvantage, one approach is to adopt an inner cylinder with a variable cross-section through the proper design to obtain a non-constant gap between the inner and outer cylinders in the TC reactor. This study investigates the use of specific profiles of the cross section for the inner cylinder to deform the Taylor vortices, effectively reducing the regions of low velocity and shear rate in the TC reactor. The profiles are composed of a series of curves. The flow patterns and shear rate distributions in the modified TC reactors were investigated using CFD modelling. The sliding mesh method and the Reynolds stress model were employed in the simulation to account for highly turbulent rotating flows. The simulated results compared with those for the classical TC reactor clearly indicate that the regions of low shear rate are effectively reduced in the modified TC reactors because the Taylor vortices occurring in the gap becomes temporal-periodic with respect to the stationary outer cylinder. The obtained shear rate distributions are remarkably narrower than those of the classical TC reactor. It was revealed that the curvature of curves for the cross-section profiles can significantly affect the shear rate distributions, and there exists an optimal profile for the inner cylinder cross-section.

Study on Flow Pattern in A Tubular Oscillatory Flow Reactor

Study on Flow Pattern in a Tubular Oscillatory Flow Reactor(Ⅱ) Flow Pattern Model for High Intensity of Oscillation

Study on fluid flow and residence time distribution in Taylor vortex flow reactor

Study on Residence Time Distribution of Fluid in the Taylor Reactor

Residence time distribution in a new horizontal self-cleaning reactor with viscous media

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Flow Patterns of Multi-Soil-layering Systems

CFD Study on the Concentration Patterns in an Orifice-Baffled Oscillatory Flow Reactor

CFD Simulation of Shear Flow and Mixing in a Taylor–Couette Reactor with Variable Cross-Section Inner Cylinders

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Structure effect of industrial loop reactors on non-uniform flow characteristics

CFD Study of Flow Fields in an Oscillatory Flow Reactor with Conic Ring Baffles

CFD Analysis of Laminar Mixing Mechanism and Performance in an Oscillatory Baffled Reactor

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

A Quantitative Method to Describe the Flow Characteristics of an Oscillating Flow Including Porous Media

Flow Characteristics of Biomass Particles in a Horizontal Stirred Bed Reactor: Part II. Modeling Studies on Particle Residence Time Distribution and Axial Mixing

A Numerical Study on the Temperature Field of Oscillatory Flow Reactor with Conic Ring Baffles

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

Residence time distributions in microchannels with assistant flow inlets and assistant flow outlets