Abstract:A Taylor–Couette (TC) reactor has been considered as a promising technology to produce uniform ultra-fine particles with controlled morphology and size because of its rather narrow shear rate distribution in comparison to a conventional stirred tank. However, small particles in the TC reactor are likely entrapped by the Taylor vortices and concentrated more in the core of the vortices, thus having an adverse or a positive impact on producing the uniformly fine particles. To mitigate this disadvantage, one approach is to adopt an inner cylinder with a variable cross-section through the proper design to obtain a non-constant gap between the inner and outer cylinders in the TC reactor. This study investigates the use of specific profiles of the cross section for the inner cylinder to deform the Taylor vortices, effectively reducing the regions of low velocity and shear rate in the TC reactor. The profiles are composed of a series of curves. The flow patterns and shear rate distributions in the modified TC reactors were investigated using CFD modelling. The sliding mesh method and the Reynolds stress model were employed in the simulation to account for highly turbulent rotating flows. The simulated results compared with those for the classical TC reactor clearly indicate that the regions of low shear rate are effectively reduced in the modified TC reactors because the Taylor vortices occurring in the gap becomes temporal-periodic with respect to the stationary outer cylinder. The obtained shear rate distributions are remarkably narrower than those of the classical TC reactor. It was revealed that the curvature of curves for the cross-section profiles can significantly affect the shear rate distributions, and there exists an optimal profile for the inner cylinder cross-section.

CFD Study of Flow Fields in an Oscillatory Flow Reactor with Conic Ring Baffles

A Numerical Study on the Temperature Field of Oscillatory Flow Reactor with Conic Ring Baffles

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

CFD Study on the Concentration Patterns in an Orifice-Baffled Oscillatory Flow Reactor

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

CFD Simulation of Shear Flow and Mixing in a Taylor–Couette Reactor with Variable Cross-Section Inner Cylinders

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

Computation of Flow Past an In-Line Oscillating Circular Cylinder and a Stationary Cylinder in Tandem Using a CIP-Based Model

Simulation of Flows Around Two Tandem Rotating Cylinders in a Channel Using LB-DF/FD Method

Study on Flow Pattern in A Tubular Oscillatory Flow Reactor

Numerical simulation of a fully baffled biological reactor: The differential circumferential averaging mixing plane approach

Study on Flow Pattern in a Tubular Oscillatory Flow Reactor(Ⅱ) Flow Pattern Model for High Intensity of Oscillation

CFD Analysis of Laminar Mixing Mechanism and Performance in an Oscillatory Baffled Reactor

CFD study of mixing characteristics of bubble column and external loop airlift reactor

CFD-DEM Study of the Effect of Ring Baffles on System Performance of a Full-Loop Circulating Fluidized Bed

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

Experiment and multiphase CFD simulation of gas-solid flow in a CFB reactor at various operating conditions: Assessing the performance of 2D and 3D simulations

Experimental Study and Cfd Simulation of Hydrodynamic Behaviours in an External Loop Airlift Slurry Reactor

A CFD-BASED OPTIMIZATION DESIGN OF FLOW DISTRIBUTION DEVICE IN THE LOWER PLENUM OF INTERMEDIATE HEAT EXCHANGER OF SFR