Abstract:A Taylor–Couette (TC) reactor has been considered as a promising technology to produce uniform ultra-fine particles with controlled morphology and size because of its rather narrow shear rate distribution in comparison to a conventional stirred tank. However, small particles in the TC reactor are likely entrapped by the Taylor vortices and concentrated more in the core of the vortices, thus having an adverse or a positive impact on producing the uniformly fine particles. To mitigate this disadvantage, one approach is to adopt an inner cylinder with a variable cross-section through the proper design to obtain a non-constant gap between the inner and outer cylinders in the TC reactor. This study investigates the use of specific profiles of the cross section for the inner cylinder to deform the Taylor vortices, effectively reducing the regions of low velocity and shear rate in the TC reactor. The profiles are composed of a series of curves. The flow patterns and shear rate distributions in the modified TC reactors were investigated using CFD modelling. The sliding mesh method and the Reynolds stress model were employed in the simulation to account for highly turbulent rotating flows. The simulated results compared with those for the classical TC reactor clearly indicate that the regions of low shear rate are effectively reduced in the modified TC reactors because the Taylor vortices occurring in the gap becomes temporal-periodic with respect to the stationary outer cylinder. The obtained shear rate distributions are remarkably narrower than those of the classical TC reactor. It was revealed that the curvature of curves for the cross-section profiles can significantly affect the shear rate distributions, and there exists an optimal profile for the inner cylinder cross-section.

Study on Flow Pattern in a Tubular Oscillatory Flow Reactor(Ⅱ) Flow Pattern Model for High Intensity of Oscillation

Study on Flow Pattern in A Tubular Oscillatory Flow Reactor

Study on fluid flow and residence time distribution in Taylor vortex flow reactor

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Study on Residence Time Distribution of Fluid in the Taylor Reactor

Study of Wave-Induced Mass Transport and Internal Mixing Based on a Two-Liquid VOF Model

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

CFD Simulation of Shear Flow and Mixing in a Taylor–Couette Reactor with Variable Cross-Section Inner Cylinders

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

CFD Study of Flow Fields in an Oscillatory Flow Reactor with Conic Ring Baffles

CFD Study on the Concentration Patterns in an Orifice-Baffled Oscillatory Flow Reactor

A Quantitative Method to Describe the Flow Characteristics of an Oscillating Flow Including Porous Media

Flow Characteristics of Biomass Particles in a Horizontal Stirred Bed Reactor: Part II. Modeling Studies on Particle Residence Time Distribution and Axial Mixing

Modeling Oscillatory Fouling in Enhanced Tubes in Cooling Tower Systems

Model study on flow pattern of industrial suspended anaerobic reactor

A Study on Flow and Heat Transfer Characteristics for Saturated Falling-Film Evaporation of Liquid Oxygen in a Vertical Channel

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

A Numerical Study on the Temperature Field of Oscillatory Flow Reactor with Conic Ring Baffles

Mathematical modeling of the residence time distribution in loop reactors

Physical modeling of oscillation effect on fluid flow in mold